Select your vehicle

Rock Krawler 3 Inch Offset Rear Spring Mounts – RK03152

Rock Krawler

Shop Rock Krawler Axle Brackets on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rock Krawler 3 inch offset rear spring mounts, part number RK03152
  • Laser cut and precision welded construction
  • Universal fit listed, with no vehicle named

Description

Overview

The Rock Krawler 3 inch offset rear spring mounts, part number RK03152, are rear spring mounting brackets with a 3 inch offset. They are laser cut and precision welded with heavy construction. They are universal fit, so compatibility with a specific year or model needs confirming.

Rock Krawler says its brackets and tabs are built to a high standard. Check spring and axle positioning against your own setup before ordering.

Key features

  • 3 inch offset
  • Laser cut
  • Precision welded
  • Heavy construction

Spring pocket and axle alignment

Spring mounts set where the leaf or coil spring sits relative to the axle. Offset changes how the spring load travels through the axle and how the wheels sit in the fender, so the mount’s position matters as much as its strength.

Before fitting, check the spring pocket, shackle angle and clearance to the tire at full travel. A mount that moves the spring too far can cause binding, uneven tire wear or a rubbing body panel, so test the range by hand before the vehicle is loaded.

Welded spring hardware should be inspected after heavy trail use. Look for cracks at the welds, bent plates and loose fasteners, and recheck the spring bolts after the first few drives since they can settle under load.

  • Check spring pocket position
  • Test clearance at full suspension travel
  • Inspect welds after heavy use
  • Recheck spring bolts after early drives

Specifications

Brand Rock Krawler
Part number RK03152
UPC 70000775886
Offset 3 inch
Position Rear
Construction Laser cut, precision welded, heavy construction
Fitment Universal fit (no vehicle named)

Vehicle fitment

The fitment field reads universal fit, but no vehicle is named, so compatibility with a specific year or model is not confirmed. Check the spring pocket and axle positioning against your vehicle’s manufacturer specifications before ordering.

Confirm your vehicle’s year, model and trim before ordering.

What’s included

Confirm the mount quantity and any hardware you need before installing.

SKU: RKSRK03152 Category:

Specification

Shipping weight 8.50 lbs
Package dimensions 16.00 × 6.00 × 5.00 in
brands

Questions & Answers

What is the Rock Krawler RK03152?

The Rock Krawler RK03152 is a 3 inch offset rear spring mount with UPC 70000775886. It is built from laser cut, precision welded pieces with heavy construction.

Are these spring mounts universal fit?

It is universal fit, which does not confirm a particular year, make or model. Measure your spring pocket position and compare it to your axle layout before ordering.

What does the 3 inch offset mean?

The 3 inch offset is the only dimension given for this mount. Offset describes how far the mount sits from center. Compare the offset with your axle and spring layout before installing.

Is hardware included with the mounts?

Confirm your hardware needs before ordering. Plan for the fasteners your installation requires and check the contents against your installation plan.

Does an offset spring mount change the axle's position?

Yes, it moves the spring's mounting point, which changes how the axle sits under the body. Check driveline angles and clearance after installation, since a change in spring position can alter both.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Rock Krawler Axle Brackets on Amazon