Overview
The Artec Industries JL5106 is a vented front inner fender for the 2018 Jeep Wrangler JL in 2-door and 4-door models, made for the Rubicon, Sport, Sport S and Unlimited trims. Inner fenders line the wheel well behind the tire and keep dirt and debris out of the engine compartment. This vented version is built from 1/16-inch aluminum.
Laser cut vents keep the engine compartment cool without an extra mesh piece to bolt on. The panels are CNC laser cut and CNC bent for a precise fit, can be trimmed for coilovers, and are compatible with trimmed OEM fenders. The fender was tested with no lift and 37-inch tires and allows the use of larger tires.
Key features
- Vented design with laser cut vents for engine compartment cooling
- Lightweight 1/16-inch aluminum construction
- CNC laser cut and CNC bent for a precise fit
- Proprietary A-blade stamping process
- Can be trimmed for use with coilovers
- Compatible with trimmed OEM fenders
- Allows use of larger tires, tested with no lift and 37-inch tires.
Vented fenders on the trail
Vented inner fenders trade some protection for airflow, so the choice depends on how the vehicle is driven. Mud and water can reach the engine area through vents, so consider how often you cross streams or drive in slush. Vents are easier to keep clear than fully closed panels because grit drains through them.
Inspect the vent edges and mounting points after trail use, looking for cracks, bent edges or loose fasteners. If a fender is trimmed for coilovers, deburr the cut edges and check clearance against the suspension again. Tire size changes also affect how the fender sits, so recheck clearance after any tire change.
- Clear vents of mud after trail runs
- Check edges for cracks and bends
- Recheck clearance after tire changes
Specifications
| Brand | Artec Industries |
|---|---|
| Part number | JL5106 |
| UPC | 816791028655 |
| Material | 1/16-inch aluminum |
| Design | Vented, with laser cut vents |
| Construction | CNC laser cut and CNC bent |
| Vehicle | 2018 Jeep Wrangler JL, 2-door and 4-door |
Vehicle fitment
Covers the 2018 Jeep Wrangler (JL), including Rubicon, Sport, Sport S, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport and Unlimited Sport S trims.
Only the 2018 model year appears in the manufacturer list for this fender, so later JL years are not confirmed here. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Trimming is permanent, so check clearance against your suspension before cutting, and deburr any freshly cut aluminum edges.
What’s included
Vented front inner fenders. Check the package contents against your installation before starting, including any mounting parts.


















