Overview
The ARB RD142 is a rear air locking differential for Toyota 8.875 inch 12 bolt axles with 30 splines. When air pressure is applied the unit locks both axle shafts together, so an open differential works as a full spool type axle and power reaches both wheels off road.
Toyota 12 bolt axles are a common base for trail builds, and a locker of this kind helps when traction is lost on one side. Because the RD142 is selectable, the driver controls when it engages.
Key features
- Air-activated locking of both axle shafts
- Full spool operation from an open differential
- Selectable operation on rear Toyota 12 bolt axles
- 30 spline configuration
Living with an air locker
An air locker changes how the rear axle behaves on loose or uneven ground. With the locker engaged, both wheels turn at the same speed, which can make steering feel firmer on pavement. Disengage it on hard surfaces and before turns where wheel speed differences are needed.
The air system needs regular attention. Check air lines for chafing where they run along the axle, and keep the compressor intake clear of mud. Moisture in the lines can slow the locker’s response, so drain the tank and check fittings periodically. Gear oil should be changed at the usual intervals for the axle, and the spline count should be confirmed before any gear work.
- Check air lines for chafing
- Drain moisture from the air tank
- Confirm axle details before gear work
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | RD142 |
| UPC | 881348008398 |
| Differential type | Selectable locker, air activated |
| Axle manufacturer | Toyota |
| Axle location | Rear |
| Axle type | Toyota 8.875 Inches 12 Bolt |
| Axle spline count | 30 splines |
Vehicle fitment
No vehicle year or model is stated. The locker is specified by axle type, Toyota 8.875 inch 12 bolt with 30 splines, so compare your rear housing against those details first.
Toyota axles with other diameters or spline counts are not covered by this part. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Count the 30 splines and confirm the 12 bolt housing before work begins. Arrange air supply in advance, since the locker runs on compressed air from a separate ARB onboard compressor.
What’s included
This part number covers the air locking differential unit. Not included: the ARB onboard air compressor that activates the locker.







