Overview
The ARB RD140 is an air locking differential sized for Ford 10.25 inch and Ford 10.5 inch rear axles that use 35 splines. Air pressure drives the mechanism that joins both axle shafts, changing a conventional open differential into a full spool type axle so both wheels receive power when one loses grip.
Ford owners often choose an air locker when a stock open differential leaves a wheel spinning on steep climbs or uneven rock. The RD140 is a selectable unit, so the driver decides when to engage it.
Key features
- Air-activated locking of both axle shafts
- Changes a conventional open differential into full spool operation
- Selectable locker for Ford rear axles
- 35 spline axle configuration
Ford rear axle basics
Ford rear axles are used in many trucks and SUVs, and a locker is often added to improve climbing traction. Gear ratio, tire diameter and axle shaft condition all change how the locker behaves, so plan them together. Taller tires put more strain on the gears, which is worth keeping in mind before choosing a locker.
Because the locker turns the rear into a fixed connection between wheels, the vehicle feels different on pavement. Expect some hop or tightness in tight turns, and drive gently until the feel is familiar. If the axle is already open for the install, replace worn bearings or seals at the same time, since the work overlaps.
- Confirm axle shaft condition before installing
- Check tire diameter against gear ratio
- Plan for tight-turn feel on pavement
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | RD140 |
| UPC | 9332018004048 |
| Differential type | Selectable locker, air activated |
| Axle manufacturer | Ford |
| Axle location | Rear |
| Axle type | Ford 10.25 Inches; Ford 10.5 Inches |
| Axle spline count | 35 splines |
Vehicle fitment
Match your rear housing to the Ford 10.25 inch or Ford 10.5 inch size and the 35 spline count before buying.
Axles with other diameters or spline counts fall outside this part. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The locker will not engage without an ARB onboard air compressor, so arrange the compressor and air lines before the installation day. Count the 35 splines on your axle first, and let a qualified technician complete the rear differential swap.
What’s included
This part number is the air locking differential unit. Not included: the onboard air compressor, which must be added separately to run the locker.







