Overview
The ARB RD82 is a 28 spline pneumatic air locking differential for 8.8 inch axles from Ford and Mazda. Engaging it turns the open differential into a full spool that sends power to both wheels.
The RD82 is a selectable locker, meaning the driver chooses when it locks. Air for the operation comes from a separate ARB onboard compressor. Since both Ford and Mazda 8.8 inch axles are covered, identify the exact axle before ordering rather than relying on a vehicle name.
Key features
- Pneumatic air control for on-demand locking
- Full spool operation delivers 100% power to both wheels
- Selectable locker type
- 28 spline axle fit
- Covers Ford and Mazda 8.8 Inches axle types
- Rear and front axle locations listed
Air supply and set-up
Because the RD82 is pneumatic, the air supply is as important as the locker itself. A compressor drawing from the vehicle’s electrical system and a reservoir on the air line keep the locker responsive when the engine is working hard. Mount the compressor and tank where they stay dry and out of splash, and check the air lines for kinks and abrasion at each service.
Engaging a pneumatic locker is quick, but it should be done on a stable surface and at low speed. Drivers who use it often notice the difference in traction first on loose or uneven ground. Once engaged, the locker drives both wheels together, so avoid tight low-speed turns on pavement, where the wheels will scrub.
When the locker is serviced, check the air fittings and the seal housing for leaks before refilling the system. A small air leak can be hard to spot by sound alone, so a soapy water test at each joint is a simple check.
- Check air lines for kinks and abrasion
- Test engagement on loose ground at low speed
- Look for leaks at fittings after each trip
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | RD82 |
| UPC | 83729000477 |
| Locker type | Pneumatic, selectable |
| Axle manufacturers | Ford, Mazda |
| Axle types | Ford 8.8 Inches, Mazda 8.8 Inches |
| Axle locations | Rear, Front |
| Axle spline count | 28 splines |
Vehicle fitment
Fit depends on the axle: Ford 8.8 Inches or Mazda 8.8 Inches, in a rear or front location, with 28 splines. Confirm the axle make and position before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the correct position, front or rear, before fitting it. An experienced axle shop should handle the teardown and gear setup, and route the air line away from moving parts.
What’s included
Not included: an ARB onboard compressor, which is needed to run the locker. Check the package contents against your installation before starting.







