Overview
The ARB RD167 is a Dana 60 air locking differential for 35 spline axles and 4.10 and down gears. It is an air activated selectable locker that converts an open differential into a fully locked spool. No vehicles are named, so the matching details are the axle type, spline count and gearing.
Operation is a simple push button once the air supply is in place. A separate air compressor is needed before the locker will work, and it is the one item to plan around during installation.
Key features
- Air activated selectable locker
- Converts from open differential to fully locked spool
- Built for 35 spline axles
- For use with 4.10 and down gears
- Simple push button operation
- Fits front or rear axle positions
Push-button control and air system
The RD167 is operated with a push button once the air supply is in place. Pressing the switch sends air to the locker, which ties the two axle shafts together so the axle acts as a solid spool. Releasing the switch lets the differential return to open action. Because the button is simple, most of the work sits in the air system, so wiring, tubing and the compressor deserve the most attention.
Before reinstalling the axle cover, test the switch and air flow on the bench. A slow response or a lock that will not hold usually points to a leak or a restricted line. Keep the air line away from the exhaust, suspension and moving parts, and secure it with clamps at regular intervals. Gear setup after the swap should be left to an axle shop that handles these units.
- Test the switch and air flow before the cover goes on
- Keep the air line clear of exhaust and moving parts
- Check line clamps and fittings after rough trails
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | RD167 |
| UPC | 88134801222 |
| Differential type | Air activated selectable locker |
| Axle manufacturer | Dana |
| Axle type | Dana 60 |
| Axle spline count | 35 splines |
| Gear ratio | 4.10 and down |
| Axle location | Front Rear |
Vehicle fitment
The RD167 is matched to the axle itself: Dana 60 housing, 35 spline shafts and 4.10 and down gearing. Verify your vehicle’s year, model and trim against this part before ordering.
It is built for 35 spline axles and 4.10 and down gearing, so other spline counts or higher gearing need a different part. Verify your vehicle’s year, model and trim against this part before ordering.
Installation notes
The air supply and the push button control are the main setup items, and both should be checked before the axle goes back under the vehicle. Gear setup after a differential swap is specialist work for an axle shop.
What’s included
Included: the RD167 air activated selectable locker.
Not included: A separate air compressor, which the locker requires to operate.







