Overview
The ARB RD193 is a pneumatic air locking differential for the Toyota 8 Inch axle, with 30 splines. Air engagement converts an open differential into a full spool, sending drive to both wheels together. The configuration is rear 12 bolt, while the location covers front or rear, so confirm the position for your build before ordering.
Running the locker takes air from a separate compressor, which this item does not include. Check the carrier and spline count against your axle before you commit to this unit.
Key features
- Air-operated full spool action for the Toyota 8 Inch axle
- 30-spline count
- Selectable locker that stays open until air engages it
- Title identifies a 12 bolt rear configuration
- Suits front or rear axle location
Air lockers and daily driving
An air locker turns an open differential into a full spool when air engages it, which helps traction when one wheel loses grip. On loose or slick terrain, that drive to both wheels can keep the vehicle moving. Engage it when traction is needed and disengage it once you are back on firm ground.
On pavement, a locked axle makes both wheels turn at the same speed, which can cause tight-turn binding and tire scrub. Keep the air system dry and the lines protected from heat and rock strikes. Carrier removal is best left to a qualified technician, and a spline check against the axle shafts should come before any installation work.
- Disengage the locker on pavement
- Keep air lines clear of heat and rock strikes
- Check carrier and spline count before fitting
- Inspect the air system after rough trail use
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | RD193 |
| UPC | 9332018000569 |
| Axle manufacturer | Toyota |
| Axle type | Toyota 8 Inch |
| Axle location | Front or rear |
| Axle spline | 30 splines |
| Differential type | Selectable locker |
| Configuration (from title) | 12 bolt, rear |
Vehicle fitment
The Toyota 8 Inch axle type and 30-spline count are the identifying details. Compare them with your carrier before ordering. Confirm your year, model and trim before ordering.
The configuration is rear 12 bolt, while the location covers front or rear, so verify axle position. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The locker needs an air supply and air line routing from an onboard compressor. Carrier removal is part of the work, which is best left to a qualified axle technician. Check the spline count against your axle shafts before installation.
What’s included
Check the package contents against your installation before starting.
Not included: Onboard air compressor and air lines.







