Overview
The ARB OMEGP3 is a greasable shackle and pin kit from ARB 4×4 Accessories, carrying the Old Man Emu name, for the rear suspension location. It is a pin and plate kit that replaces worn shackle pins on a leaf spring setup. It is a Direct Fit kit, so confirm the year, make, model and chassis code against your vehicle before ordering.
Greasing and inspection
A greasable shackle pin allows lubrication at the pin, which reduces friction and wear in the shackle joint. Grease pushed through the fitting pushes dirt and water out of the pin area. Regular greasing helps keep the pin moving freely and limits metal-on-metal contact in the leaf spring setup.
Check the shackle plates and pins for play, cracking or flat spots during routine service. Clean the grease fitting before pumping grease so dirt does not enter the joint. Replace the pin kit when movement becomes noticeable or when grease no longer flows, since a worn shackle can affect steering feel and suspension alignment.
- Grease the pin after each deep water crossing
- Wipe the fitting clean before use
- Inspect plates for cracks
- Check for play by hand with the vehicle supported
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | OMEGP3 |
| UPC | 881348005908 |
| Location | Rear |
| Design | Greasable pin and plate kit |
Vehicle fitment
Direct Fit identifies no specific make, model or year range, so confirm fit for your vehicle before ordering.
Confirm your vehicle’s year, model and trim before ordering.




