Overview
The ARB OMEGP1 is a greaseable shackle and pin kit for leaf spring suspension, for 70 and 75 Series 84-14, 60 Series 80-90 and 45 Series 80-85 applications.
A leaf spring shackle connects the end of the spring to the frame and lets the spring change length as the axle moves. ARB says its greaseable shackle kits use an easy bolt together assembly that avoids out of angle shackle pin to side plate problems, and each shackle pin has two grease outlet holes for grease coverage.
Key features
- Greaseable shackle and pin kit
- Easy bolt-together assembly
- Designed to avoid out of angle shackle pin to side plate problems
- Each shackle pin has two grease outlet holes
- For use with 70 and 75 Series 84-14, 60 Series 80-90 and 45 Series 80-85
- Direct fit for the applications above
Greasing and inspecting shackles
Leaf spring shackles let the spring change length as the axle moves, so the pins and bushings take repeated load and wear over time. Regular greasing keeps the pin moving freely and helps reduce squeaks and binding. Dirt and water can work into the joint, so wipe the fitting area clean before pushing grease in.
Inspect shackles at each service for play, cracked side plates, bent links and worn bushings. A shackle that binds can change ride height and cause uneven tire wear or stress on the spring eye. When replacing a shackle, check the frame mounts and bolts at the same time, and replace worn hardware rather than reusing it.
- Grease the pins after off-road trips
- Check for side plate cracks or bends
- Look for play in the spring eye
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | OMEGP1 |
| UPC | 881348005885 |
| Part type | Leaf spring shackle and pin kit |
| Listed use | 70 and 75 Series 84-14, 60 Series 80-90, 45 Series 80-85 |
| Grease outlets | Two grease outlet holes on each shackle pin |
| Fit type | Direct fit |
Vehicle fitment
The kit is used on 70 and 75 Series 84-14, 60 Series 80-90 and 45 Series 80-85 applications.
Match the series numbers and years to your vehicle before ordering. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Follow the installation steps included with the kit and torque all fasteners to the specified values. Professional installation is recommended for suspension, steering, brake and axle components. Support the vehicle securely on stands before removing shackles, and grease the pins as directed. Have the alignment checked after any suspension or steering work. Re-check fasteners after the first miles of driving.






