Overview
The ARB RD145 is a 2.5 Ton air locking differential for Rockwell axles that have 16 splines. Air pressure engages the locker and locks both axle shafts, changing the differential into a full spool type axle for traction on difficult ground.
This unit is built for Rockwell axles rather than the Ford, Toyota or Dana housings covered elsewhere in the range. Its specifications list both rear and front locations, so confirm the axle position on your build before fitting.
Key features
- Air-activated selectable locker
- Turns an open differential into a full spool type axle
- 16 spline configuration
- Available for rear or front axle locations
Heavy-duty axle considerations
A 2.5 Ton Rockwell locker is aimed at heavier builds where the axle carries more load and torque. Those loads place extra stress on the gears, axle shafts and bearings, so the housing and its mounting should be inspected before the unit goes in. Tire size and gearing still matter, since oversized tires add strain even with a sound locker.
Front and rear positions use the same locking principle but different carriers, so confirm the housing position before buying. Keep brake and suspension components in good condition too, because a locked axle transfers more force through them during hard driving. Look for leaks, cracked housings and worn pinion seals at each service.
- Inspect the housing before installing
- Check brake and suspension parts
- Look for pinion seal leaks at service
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | RD145 |
| UPC | 881348007186 |
| Differential type | Selectable locker, air activated |
| Capacity | 2.5 Ton |
| Axle type | Rockwell |
| Axle location | Rear and Front |
| Axle spline count | 16 splines |
Vehicle fitment
Fitment is by axle type: Rockwell housings with 16 splines, in the rear or front position. Match the housing position before installation.
It is made for Rockwell axles with 16 splines. Check the year, model and trim of your vehicle before you order.
Installation notes
Verify the 16 spline count and whether your Rockwell housing is front or rear before starting. Plan a compressor location and air line run, because the locker needs air to engage, and have a qualified technician handle differential removal and installation.
What’s included
The air locking differential unit is the item under part number RD145. Not included: any air compressor, which the locker needs to engage and must be added separately.







