Overview
The ARB RD162 is an air locking differential for Dana 60 axles with 30 splines and 4.56 and up gear ratios. Air pressure locks both axle shafts so an open differential works as a full spool type axle.
The specifications list both front and rear locations, which makes the RD162 a choice for either end of a Dana 60 setup. Confirm which position your axle occupies before starting the job.
Key features
- Air-activated selectable locker
- Turns an open differential into full spool operation
- Front or rear axle location
- 30 spline configuration
- For 4.56 and up gear ratios
Gear ratio and locker choice
Gear ratio changes how a locker feels on the trail. A numerically higher ratio gives more torque at the wheels for a given engine speed, which suits slow crawling. Lockers work best when gearing and tire size are chosen together, because a larger tire lowers the effective ratio and adds load to the axle shafts. Taller tires with the same gears can make a locker feel weaker on steep climbs.
Because the locker ties both shafts together, the carrier, pinion and axle shafts all carry the full torque of both wheels. Before adding a locker to a Dana 60, inspect the shafts, bearings and ring and pinion for wear. A worn carrier is more likely to fail under locked load than under open-differential driving.
- Check tire size before settling on gear ratio
- Inspect ring and pinion contact after installation
- Replace worn axle shaft bearings during the swap
- Match the locker to the housing being rebuilt
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | RD162 |
| UPC | 837290004353 |
| Differential type | Selectable locker, air activated |
| Axle manufacturer | Dana |
| Axle location | Front and Rear |
| Axle type | Dana 60 |
| Axle spline count | 30 splines |
| Gear ratio | 4.56 and up |
Vehicle fitment
No vehicle year or model is stated. The unit is specified by Dana 60 axle type, 30 splines and 4.56 and up gear ratios, so confirm each detail before choosing it.
This is not the Dana 50 or any other axle family. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Verify that the gear ratio is 4.56 or higher and count the 30 splines first. Set up the onboard air compressor and air lines before the first engagement, and have a qualified shop carry out the differential installation.
What’s included
The Dana 60 air locking differential is the item under part number RD162. Not included: any air compressor needed to engage the locker.







