Overview
The ARB RD158 is a front air locking differential for Dana 50 axles with 30 splines. Air pressure locks both axle shafts so the differential behaves as a full spool, sending torque to both front wheels.
A front selectable locker like this one gives the driver control over when both front wheels are tied together on uneven ground. The Dana 50 front axle is the stated application.
Key features
- Air-activated locking of both axle shafts
- Turns an open differential into full spool operation
- Front axle location
- 30 spline configuration
Care and maintenance
Front lockers are used most in slow, technical terrain such as rock crawls and ruts, where one front tire lifts and the other needs drive. A locked front axle turns both wheels at the same speed, so steering feels tighter on hard surfaces. Many drivers disengage the lock for road use and engage it only when the trail calls for it.
Front axle work also involves the steering and driveline. Check the ball joints, tie rod ends and CV or U-joints for play whenever the front differential is opened, because a locked axle puts more strain on these parts. Route the air hoses away from the steering linkage and exhaust so they stay protected.
- Check the front axle seals after each installation
- Listen for grinding when the locker engages
- Inspect air lines for chafing near the frame
- Keep the differential fluid at the correct level
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | RD158 |
| UPC | 9332018015549 |
| Differential type | Selectable locker, air activated |
| Axle manufacturer | Dana |
| Axle location | Front |
| Axle type | Dana 50 |
| Axle spline count | 30 splines |
Vehicle fitment
It is built for the Dana 50 front axle with 30 splines, so the housing has to match that axle type.
This part is for the Dana 50 axle only. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure the front axle and count its 30 splines before installation. Front differential work is involved, so a qualified shop should perform the swap, and an onboard air compressor is needed to run the locker.
What’s included
This item is the air locking differential for the front axle. Not included: the onboard air compressor that activates the locker.







