Overview
The ARB RD132 is an air locking differential for the Toyota 8 Inch axle, with 30 splines, and its axle location is given as front or rear. Air pressure turns the open differential into a full spool.
Because the location covers both front and rear, confirm the axle position on your vehicle first. No model or year is stated, and an ARB air compressor is needed to operate it.
Key features
- Front or rear axle location
- 30 spline axle design
- Selectable air-operated locker
- Full spool conversion
Setup and upkeep
An air locker changes how an axle shares torque. With the lock disengaged, the differential behaves like an open unit and sends power to the wheel with the least grip. Engaging the air mechanism ties both axle shafts together, which helps when one wheel lifts or slips on rough ground. Because a locked axle steers less predictably on pavement, most drivers disengage the lock before returning to the road.
Choosing the right unit starts with the axle rather than the brand. Confirm the housing, spline count and front or rear position before buying. Air lockers are often installed with new carrier bearings and gaskets because the carrier is opened for the work. After installation, check the air line where it passes the frame for chafing, and inspect the fittings at each service for seepage.
- Inspect air lines for chafing and leaks regularly
- Recheck carrier bolts after the first few trail runs
- Keep the compressor intake filter clean
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | RD132 |
| UPC | 88134800702 |
| Axle manufacturer | Toyota |
| Axle location | Front or rear |
| Axle type | Toyota 8 Inch |
| Axle spline | 30 splines |
| Differential type | Selectable locker |
Vehicle fitment
No model or year is named, and the axle type is Toyota 8 Inch in either location, so fit to a particular vehicle is not confirmed.
The Universal Fit label is not vehicle-specific; the axle size and spline count are the real match points.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm front or rear position and spline count first. Then have a shop install the carrier, set the gears and route the air line to the compressor.
What’s included
Check the package contents against your installation before starting.
Not included: the ARB compressor, sold as a separate item.







