Overview
The ARB RD166 is a Dana 60 air locking differential made for 35 spline axles, with 4.56 up gearing. Air-selected locking turns the open differential into a full spool, sharing power across both wheels. It is designed for front or rear positions.
A pneumatic locker like this suits trail driving where one wheel can lift or lose grip. Choosing the RD166 means matching the 35 spline count and 4.56 up gearing exactly. Lockers for 30 and 32 spline axles are separate part numbers in the same ARB line.
Key features
- Air-selected locking for on-demand full spool
- Sends power to both wheels together
- Built for 35 spline axles
- Listed gearing: 4.56 up
- Axle location: front or rear
- Needs an onboard air compressor to activate
Trail driving and gear ratio
Lockers earn their place when one wheel leaves the ground or loses contact on a climb. An open axle sends power to the wheel with the least grip, but a locked axle keeps both wheels pulling, which can carry the vehicle over a ledge or through a rut. Use the lock deliberately and release it once the obstacle is behind you, so the tires can turn at different speeds on the next corner.
Gear ratio affects how the axle reacts to the lock and to tire size. Larger tires change the effective gearing, so a tire upgrade can shift how strongly the axle pulls at low speed. Before a long trip, recheck the driveline bolts and U-joint straps, because the locked axle transmits more torque through them. Keep the gear oil at the level the axle needs.
- Recheck driveline bolts after the first runs
- Note tire size changes against the gear ratio
- Release the lock before highway speeds
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | RD166 |
| UPC | 88134801221 |
| Differential type | Selectable air locker |
| Axle manufacturer | Dana |
| Axle type | Dana 60 |
| Axle spline count | 35 splines |
| Gear ratio | 4.56 up |
| Axle location | Front|Rear |
Vehicle fitment
The RD166 is matched to the axle: the Dana 60 housing, 35 spline shafts and 4.56 up gearing. Check the year, model and trim of your vehicle before buying.
Axles with other spline counts need a different locker. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Treat the air compressor and its plumbing as a separate project to finish before the locker can be engaged. Carrier and gear setup after a differential change should be left to a qualified axle shop.
What’s included
Included: the RD166 air locking differential.
Not included: An ARB air compressor, required to activate the locker.








