Overview
The ARB CS059R is a leaf spring from ARB 4×4 Accessories, part number CS059R. It is a direct fit for the 2006–2010 Hummer H3, covering the Alpha, Base, Championship Series and X models, and for the 2009–2010 Hummer H3T, covering the Alpha and Base. The two-stage pack handles the unladen load on its primary leaves and adds the secondary leaves under heavier loads.
Draw tapered and diamond cut leaves spread the load across the spring. The leaves are graphite coated and shot peened on the tension side, and nylon interleaf pads reduce friction at the tips. Each spring is scragged and load tested, which helps it keep its set on a heavy vehicle.
The H3 and H3T are heavy vehicles with a wide track, so the spring’s job is to hold the axle steady across rough ground as well as to carry weight. Match the year and trim to your vehicle before buying.
The CS059R’s two-stage design and diamond cut leaves are built to carry a heavy vehicle’s weight without losing the unladen ride. The graphite coating and shot peened tension side reduce friction and stress in the leaves, and the nylon interleaf liners keep the leaf tips moving freely under load.
Key features
- Two-stage leaf pack for ride comfort and support.
- Draw tapered leaves distribute load along the spring.
- Diamond cut leaf ends reduce stress at the tips.
- Fully scragged and load tested.
- Graphite coating between the leaves.
- Regreasable nylon interleaf liners.
- Shot peened tension side of each leaf.
Signs the spring is worn
Leaf springs on heavy trucks and SUVs do more than carry weight. They also locate the axle, so worn leaves, cracked spring eyes or sagging ends can change how the vehicle tracks over rough ground. Before replacing a spring, look for a rear corner that sits lower than the other side, cracks near the spring eye, broken or shifted leaves, and play in the shackle bushings. Those signs usually mean the pack has lost its set or its load capacity.
On a two-stage pack, the secondary leaves are the ones that engage under heavier loads, so they see the most stress when a vehicle is loaded for work or towing. Many owners replace the shackles, bushings and U-bolts at the same time, because those parts wear together and affect how the new spring settles into the axle.
- Check spring eyes for cracks
- Inspect shackle bushings for play
- Compare side-to-side sag under the same load
- Look for leaves that have shifted out of alignment
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | CS059R |
| UPC | 70000689137 |
| Type | Leaf spring |
| Leaf pack | Two-stage |
| Leaf ends | Draw tapered, diamond cut |
Vehicle fitment
It is a direct fit for the 2006–2010 Hummer H3 (Alpha, Base, Championship Series and X) and the 2009–2010 Hummer H3T (Alpha and Base).
The Hummer H2 and H1 are not covered by this part, and H3 coverage ends at 2010. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The pack includes one leaf spring. Check the package contents against your installation before starting.




