Overview
The ARB CS009R is a two-stage leaf spring from ARB 4×4 Accessories, part number CS009R. Its primary leaves carry the vehicle unladen, and the secondary leaves join the load when more weight is carried. Check fit against your vehicle’s year, model and trim before buying.
The leaves are draw tapered and diamond cut, with a graphite coating between them. The tension side of each leaf is shot peened, which lowers stress in the steel, and a military wrap is fitted to the eye. Regreasable nylon interleaf liners sit at the leaf tips.
The right-hand part of a two-stage design is the point where the second set of leaves starts to carry load. That point is set by the geometry and the rating, so the spring should be checked against the weight it will carry rather than assumed to suit every use.
Shot peening is applied to the tension side of each leaf, the face that bends most as the spring flexes under load. Peening is a common way to improve fatigue life in leaf springs, which is why the tension side is the treated face.
Key features
- Two-stage pack provides a comfortable unladen ride with added load capacity.
- Draw tapered leaves spread the load over a larger surface.
- Diamond cut leaf ends reduce stress where the leaves finish.
- Fully scragged so the spring keeps its set under load.
- Load tested against the stated specification.
- Graphite coating between the leaves to cut friction.
- Regreasable nylon interleaf liners at the leaf tips.
- Military wrap on the spring eye for safety.
Two-stage springs in use
In a two-stage spring the primary leaves do most of the work on the road, and the secondary leaves come into play as the load builds. Drivers often notice the change as a firmer feel once the second stage engages. This is normal for the design, and a truck run mostly unladen will still ride well.
Shot-peened tension sides and graphite-coated leaves help the spring hold up over years of flexing, but the interleaves still need periodic grease at the tips. Clean off grit before greasing, and watch for black dust between leaves, which points to rubbing that needs attention.
- Grease the nylon liners at the tips during service
- Check the center bolt for tightness
- Look for leaves that have shifted out of alignment
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | CS009R |
| UPC | 700003479131 |
| Type | Leaf spring |
| Leaf pack | Two-stage |
| Leaf ends | Draw tapered, diamond cut |
| Liners | Regreasable nylon interleaf |
Vehicle fitment
Fit has to be checked against your year, model and trim before buying. Match the spring to the axle and mounting points before fitting it.
What’s included
One leaf spring. Check the package contents, including center bolts and U-bolts, against your installation before starting.


