Overview
The ARB CS055R is a 2.25 inch leaf spring from ARB 4×4 Accessories, part number CS055R, for rear mounting. The two-stage leaf pack carries the vehicle unladen on its primary leaves and adds the secondary stage under heavier loads. Confirm fit for your vehicle’s year, model and trim before ordering.
The spring uses draw tapered, diamond cut leaves, graphite coated leaves and shot peened tension sides. Regreasable nylon pads at the leaf tips reduce friction where the load is greatest, and each spring is scragged and load tested. The military wrap on the eye is part of the design for added safety.
A 2.25 inch lift is a moderate height change, so the spring suits a truck with a modest lift rather than a large suspension build. Because it is written for the rear, read the lift figure together with that mounting location.
The 2.25 inch lift is combined with a rear mounting location, so the spring is intended to lift and carry the rear of the vehicle. The two-stage design and diamond cut leaves keep the ride balanced as the load changes, and the scragging and load testing help the spring hold its set over time.
Key features
- 2.25 inch lift rating.
- Rear mounting location.
- Two-stage pack for comfort and capacity.
- Draw tapered and diamond cut leaves spread the load.
- Scragged and load tested for a permanent set.
- Graphite coating reduces friction between leaves.
- Shot peening of the tension side of all leaves.
Lift height and rear loads
Raising the rear with a lift spring changes the driveshaft angle and how the rear axle sits under the body. A higher rear can increase vibration if the angle moves too far from the front. After installation, check the driveshaft angle and listen for vibration at highway speed before relying on the truck for long trips.
Rear lift springs also change how the truck loads under braking and cornering. Check the brake lines and rear brake hoses for stretch after the height change. Shock absorbers may need to match the new height, and worn bump stops should be replaced while the springs are out.
- Measure driveshaft angle after fitting
- Check brake hoses for stretch
- Match shock length to the new height
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | CS055R |
| UPC | 881348008145 |
| Lift | 2.25 in. |
| Mounting location | Rear |
| Leaf pack | Two-stage |
| Leaf ends | Draw tapered, diamond cut |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering.
What’s included
One rear leaf spring. Check the package contents against your installation before starting.




