Overview
The ARB CS061R is a leaf spring from ARB 4×4 Accessories, part number CS061R, with a two-stage leaf pack. The primary leaves carry the vehicle unladen, and the secondary leaves add support as the load increases. No vehicle is named for this part, so its fit should be checked before ordering.
ARB builds the leaves as draw tapered and diamond cut, graphite coats them to reduce friction, and shot peens the tension side of each leaf. Regreasable nylon pads sit at the leaf tips, and each spring is scragged and load tested before it is offered.
The construction of this spring is the same family of features used across ARB’s leaf range, so the points that set it apart are the part number and the fit. Those should be confirmed against the vehicle’s year, model and trim, along with the axle type and mounting points.
The two-stage design of the CS061R lets the spring carry a light load comfortably and a heavier one with extra support. The draw tapered leaves and the diamond cut tips keep the stress along each leaf even, while the graphite coating and nylon pads keep friction low as the leaves flex against one another.
ARB’s description does not add lift, load or fitment details beyond those already given, so the figures in the table are the reference points for comparison.
Key features
- Two-stage pack for a comfortable unladen ride.
- Draw tapered leaves spread load evenly.
- Diamond cut leaf ends reduce stress.
- Scragged so the spring holds a permanent set.
- Load tested to the specification.
- Graphite coated leaves.
- Regreasable nylon anti-friction pads.
- Shot peened tension side of each leaf.
Choosing a two-stage spring
A two-stage leaf pack is built to feel comfortable when the vehicle is light and to add support as weight goes on. That makes it a good fit for a daily driver that sometimes carries tools, gear or a hitch load. A single-stage spring tends to feel firmer unladen, so the choice comes down to how the vehicle is used most of the time.
Before buying, consider the leaf ends and mounting style. Draw tapered leaves and diamond cut ends are common on this type of spring, and they affect how the pack flexes at the tips. Compare the spring eye, the center bolt and the shackle hardware with the old spring so nothing is missing at installation.
- Match the spring eye and shackle style
- Replace the center bolt if it is worn
- Check the U-bolts for thread damage
- Compare leaf count with the old pack
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | CS061R |
| UPC | 700005562061 |
| Type | Leaf spring |
| Leaf pack | Two-stage |
| Leaf ends | Draw tapered, diamond cut |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering, including the axle type and mounting points.
What’s included
The kit is one leaf spring. Confirm center bolts and hardware against your installation before starting.


