Overview
The ARB Leaf Spring, part number CS005F, is a replacement leaf spring built with tapered and diamond cut leaves, a graphite coating and anti friction pads. It is fully scragged and load tested, with shot peened leaves and military wrap.
It is a universal fit spring, and no vehicle, axle position or load rating is named for it. Leaf springs are normally matched to a vehicle, axle and load, so confirm the application before ordering.
The two-stage leaf pack is featured on most rear springs. Unladen, the vehicle rides mainly on the primary stage, and the secondary stage adds support when a heavy load is carried.
Key features
- Draw tapered and diamond cut leaves spread the load over a larger surface area, reducing high stresses at the leaf ends.
- Fully scragged and load tested; scragging gives the spring a permanent set that reduces the risk of sagging
- Graphite coating to reduce friction between the leaves and friction pads
- Military wrap, designed to provide added safety
- Regreasable nylon anti friction interleaf liners at the leaf tips
- Flat axle seat area for a positive axle mount
- Shot peened tension side on all leaves, designed to extend spring life.
- Two-stage leaf pack featured on most rear springs
Signs the springs are worn
A leaf spring wears through its bushings, shackles and leaf contact surfaces long before it breaks. Watch for a corner that sits lower than the other, a vehicle that leans under load, or a clunk when the axle moves over bumps. Each of those points to a worn or fatigued spring pack or related hardware.
Check the leaves for cracks, broken leaves and rust scale at the spring pack, and look at the eye bushings for play. Greasing the regreasable anti friction pads on a regular schedule helps slow wear, and the graphite coating on the leaves cuts friction between them. Replacing worn shackles or bushings at the same time keeps the new spring working as intended.
- Sagging at one corner
- Cracked or broken leaves
- Worn eye bushings or shackles
- Clunks or squeaks over bumps
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | CS005F |
| UPC | 9332018022455 |
| Product type | Leaf spring |
| Leaf design | Draw tapered and diamond cut leaves |
| Testing | Fully scragged and load tested |
| Coating | Graphite |
| Interleaf liners | Regreasable nylon anti friction pads |
| Other features | Military wrap, flat axle seat area, shot peened leaves |
| Fitment listing | Universal fit |
Vehicle fitment
The spring is a universal fit part. Confirm the spring rate, length, load rating and front or rear position against your vehicle before ordering.
Leaf springs are matched to a vehicle, axle and load. Make sure the year, model and trim match your vehicle before ordering.
Installation notes
A leaf spring carries the vehicle’s weight and locates the axle, so professional installation is recommended. Replace springs as a pair on the same axle, use suitable mounting hardware and tighten it to the correct torque for your vehicle. Afterwards, check ride height, axle alignment and brake line length through full travel.



