Overview
The ARB IPF Xtreme LED Driving Light Series 2, part number ARB900XLSS2, is a spot light for 12V and 24V systems. It is rated at 30 watts with three 10W LEDs, and it is universal fit.
The light is a spot beam, so it is designed for distance rather than width. Optics and housing size are not covered here.
Key features
- Spot beam
- Series 2 of the IPF Xtreme LED driving light
- 12V and 24V
- 30 watts with three 10W LEDs
Spot lights for distance
A spot beam concentrates light in a narrow pattern, so it reaches far down a track or road ahead. That reach is most useful at higher speeds on open ground, where seeing well ahead gives more time to react. On slow, tight trails the narrow pattern lights less of the edges, so it is often used with a wider light beside it.
Electrical load matters with any LED driving light. Run the supply through a fused connection and a relay for the switch, and confirm that the cable is sized for the current. Keep the lens clean and check the mounting after rough driving, since a loose bracket can move the beam off the line you set.
- Set the aim on level ground
- Check the supply voltage before wiring
- Clean the lens after muddy trips
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | ARB900XLSS2 |
| Beam pattern | Spot |
| Voltage | 12V and 24V |
| Watts | 30 watts |
| LEDs | 3 x 10W |
| Fitment | Universal fit |
Vehicle fitment
It is universal fit and is not sized for a specific vehicle. The mounting and wiring should suit the vehicle you fit it to.
What’s included
The package is one spot light. Check the package contents against your installation before starting.









