Overview
The KC HiLites Flex LED Linker Kit, part number K/C12724, is an accessory kit that links KC FLEX LED lights together, universal fit. It connects any KC FLEX dual or array, so you can build custom lighting combinations. The kit is not a light itself and is used only with KC FLEX lights.
Key features
- Links any KC FLEX dual or array
- Allows custom lighting combinations
- Front and rear connecting linkers
- Positive jumper wire
- Four black screws for mounting the linkers
Wiring multiple light arrays
Linking lights into an array puts several light heads on one wiring run, so the total current of the whole group matters more than any single light. Add up the draw of every light before connecting them, and keep the feed fused close to the power source so a fault in one link cannot damage the rest of the system.
Connections are the weak point in any linked setup. Tighten the linker screws firmly, keep the joints dry and out of spray, and route the jumper wire away from hot exhaust and moving suspension. Check each joint after the first few trail runs, since vibration can loosen screws over time.
- Add up the total current before linking lights
- Keep the feed fused close to the power source
- Tighten linker screws and keep joints dry
- Check joints after the first few trail runs
Specifications
| Brand | KC HiLites |
|---|---|
| Part number | K/C12724 |
| Type | Linker kit for KC FLEX LED lights |
| Included | Positive jumper wire, front linker, rear linker, four black screws |
| Compatibility | KC FLEX Dual and array lights |
Vehicle fitment
It is a universal fit accessory for KC FLEX lights, so it is not made for a specific year, make or model. Confirm your KC FLEX lights are the dual or array type before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Connect the front and rear linkers with the positive jumper wire and fasten them with the four black screws. The linkers join the lights to make an array, so keep the wiring for the lights fused as the lights require.
What’s included
Positive jumper wire, front and rear connecting linkers, and four black screws. The FLEX LED lights are not included.









