Overview
The Moog alignment cam is a steering and suspension part sold individually for two Jeep applications. It fits the 1997 to 2006 Jeep Wrangler TJ, including Rubicon and Unlimited models, and the 1993 to 1998 Jeep Grand Cherokee ZJ. An alignment cam adjusts camber and caster, so it changes how the wheel sits, and it installs at the axle or control-arm mount where the factory fastener sits.
Moog’s Problem Solver line is designed for like-new steering, straightforward installation and longer life. The cam is direct fit and uses a patent pending Sunoloy coated bearing, with a cover plate design that allows tighter tolerances than traditional designs. Wear life depends on how the vehicle is driven and maintained.
Key features
- Powdered metal gusher bearing design that lets grease flow through the bearing to the stud.
- Patented cover plate design that MOOG says allows tighter tolerances
- Full ball metal stud, which MOOG says provides 360 degrees of rotational movement
- Patent pending Sunoloy coated metal bearings for smooth stud swing
- Direct fit for the listed Jeep applications.
Camber and caster after install
Camber and caster settings affect tire wear, steering return and how the vehicle tracks on the road. A worn or out-of-range setting can wear the inside or outside edge of a tire quickly, so the cam adjustment is only useful when the alignment is measured afterward. Use the cam to bring the numbers into range, not to hide worn parts.
Alignment cams are often replaced with other front-end wear items. Check the ball joints, tie rod ends and control arm bushings before adjusting, since worn joints make the setting drift. A new cam should hold its position once tightened, but recheck the alignment after the first drive.
- Inspect ball joints for play before adjusting
- Check the tire wear pattern to guide the setting
- Recheck alignment after the first drive
- Tighten cam bolts to the specified torque
Specifications
| Brand | Moog |
|---|---|
| UPC | 80066443102 |
| Product type | Alignment cam, caster and camber adjustment |
| Fits | 1997 to 2006 Jeep Wrangler TJ; 1993 to 1998 Jeep Grand Cherokee ZJ |
| Sold as | Individually |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1997 to 2006 Jeep Wrangler TJ, including Rubicon and Unlimited models, and the 1993 to 1998 Jeep Grand Cherokee ZJ. Both fits are identified by year and chassis, so match your vehicle to those years. Other Wrangler generations and Grand Cherokee years are not covered.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
An alignment cam changes the camber setting, so the front end needs a four-wheel alignment once the part is installed. Because the cam is set during alignment, the work is normally done in a shop with alignment equipment.
What’s included
One alignment cam, sold individually.
Not included: Mounting hardware and the second side’s cam are sold separately, so buy any companion parts you need.








