Overview
The Advanced Accessory Concepts Trigger Switch Harness, 12 gauge, part 2002, is a single wire harness that extends the usable length of the TRIGGER wireless solid state relay system. It is a six-foot extension, sold individually, and it is not tied to a specific vehicle.
The TRIGGER system is an accessory controller. It saves installation time because the wiring for accessories does not have to run under the dash or through the firewall, and it adds an RF remote for switching accessories from outside the vehicle. It also handles dimming and flashing for lights, and its fused circuits show blown fuses with LED indicators.
This harness is the 12 gauge version. The same six-foot length is available in 14 gauge, so choose the gauge that suits your circuit.
Key features
- Single wire harness for the TRIGGER control system
- 12 gauge wire
- Six-foot extension length
- Available in 12 or 14 gauge in six-foot lengths
- Sold individually
- Universal fit
Planning a wiring extension
A wire extension is only as good as the run it covers. Measure the path from the control box to the accessory, allowing for bends and the connection points, before buying a length. Routing the wire away from heat sources, sharp edges and moving parts helps prevent chafing and voltage loss.
Accessory circuits should be fused close to the power source, and the fuse rating should match the wire gauge and the load. Keep connections dry and sealed, since water and grime at the splice are a common cause of intermittent faults. Check the wire insulation periodically for cracks or abrasion.
- Measure the full run before choosing a length
- Fuse each accessory circuit near the power source
- Route wire away from heat, edges and moving parts
- Seal connections against water and dirt
Specifications
| Brand | Advanced Accessory Concepts |
|---|---|
| Part number | 2002 |
| UPC | 858208006719 |
| Gauge | 12 gauge |
| Length | Six feet |
| Compatible system | TRIGGER wireless accessory control system |
| Switches | Not included |
Vehicle fitment
This harness is a universal accessory part, not sized for one vehicle. Its six-foot length sets the reach, so measure the run between the control box and the accessory first.
What’s included
The item is one 12 gauge harness, six feet long. Switches are not included with the harness.












