Overview
The Advanced Accessory Concepts Trigger 36-inch Connector Harness, part number 2005, is an offset wiring harness that extends the reach of the Trigger Accessory Control System. It suits running power from the main harness to a second accessory, such as two separate light units on opposite sides of a vehicle that share one circuit.
Key features
- 36-inch, 12 gauge offset harness
- 6-inch leg and 30-inch leg for two positions
- Sealed wires and waterproof connectors
- Shielded insulation
Planning the two legs
An offset harness with two legs suits a circuit that feeds two accessories from one main run. The longer leg usually reaches the farther accessory, while the shorter leg serves the nearer one. Measuring both positions with the harness laid out before mounting helps avoid leftover slack or strain at the connectors.
Wire gauge and fusing set how much current the circuit can carry, so the load of both accessories should be added up before connecting them. Shielded insulation and sealed wires help in damp conditions, but routing away from hot exhaust parts and sharp edges still protects the harness over time.
- Measure both accessory positions before cutting
- Keep connector plugs covered when unused
- Recheck fuse size after adding accessories
Specifications
| Brand | Advanced Accessory Concepts |
|---|---|
| Part number | 2005 |
| UPC | 858208006917 |
| Harness length | 36-inch |
| Wire gauge | 12 gauge |
| Leg lengths | 6-inch and 30-inch |
| Connectors | Waterproof |
| Insulation | Shielded, sealed wires |
Vehicle fitment
This harness is universal fit and is not tied to a specific make, model or year. Its routing depends on where the two accessories sit relative to the main harness.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Plan the 6-inch and 30-inch legs against the two accessory positions before cutting any wire. Run the circuit through a fuse, and check local rules before mounting auxiliary lights on a road vehicle.
What’s included
The item is the 36-inch offset connector harness, part number 2005. No other components are described.














