Overview
The Advanced Accessory Concepts Trigger Switch Harness (14 Gauge), part AAC2003, is a 6-foot wire harness for the TRIGGER Wireless Accessory Control System. It extends the usable length of the TRIGGER Wireless Solid State Relay System. It is universal fit and is not tied to a particular vehicle.
The harness is offered in 12 or 14 gauge, and this version is the 14 gauge option. Using the harness removes the need to run wires under the dash or through the firewall when adding accessories, and the system adds RF remote control from outside the vehicle and dimming or flashing for installed lighting.
Key features
- Extends the usable length of the TRIGGER Wireless Solid State Relay System
- 6-foot length in 14 gauge (12 gauge also offered)
- Removes the need to run wires under the dash or through the firewall when wiring accessories
- Works with the TRIGGER system’s RF remote control for activating accessories from outside the vehicle
- Fused circuits with LED indicators show blown fuses
Routing and relay wiring
A wireless relay system reduces the number of long wires through the dash, but the controller still needs power, a ground and a clear route to each accessory. Plan the path from the controller to every light or pump before cutting any loom, and allow room for a fuse near the power source.
Remote-controlled accessories rely on steady power and clean grounds. Fused circuits with indicator LEDs make it easier to spot a blown fuse, but the fuses still need to match the load on each circuit. Inspect the harness connectors and wire insulation after vibration-heavy use.
- Mount the controller where its antenna is not blocked
- Use strain relief where wires leave the harness
- Check fuse ratings against each accessory’s load
Specifications
| Brand | Advanced Accessory Concepts |
|---|---|
| Part number | AAC2003 |
| UPC | 858208006726 |
| Wire gauge | 14 gauge (12 gauge also offered) |
| Length | 6 feet (6′) |
| Compatible system | TRIGGER Wireless Accessory Control System |
| Fitment | Universal fit |
Vehicle fitment
This harness is universal fit and is not vehicle-specific. The main check is compatibility with your TRIGGER system and the wire run length between the controller and each accessory.
Installation notes
The harness replaces running new wires under the dash or through the firewall, but the path from the controller to each accessory still needs to be planned. Use the fused circuits with LED indicators to catch blown fuses.
What’s included
The 6-foot, 14-gauge wire harness.
Not included: the TRIGGER Wireless Accessory Control System and the accessories it controls.












