Overview
The Omix-ADA manual transmission case plug, part 18887.81, is a replacement plug for the manual transmission housing on six-cylinder engines. It fits the 1997–2001 Jeep Wrangler TJ in the SE, Sahara and Sport trims.
The plug closes an opening in the transmission housing. Using the original-specification part keeps the housing sealed where the plug fits.
Key features
- Replacement transmission housing plug
- For six-cylinder engine applications
- Built to original Jeep specifications
Sealing the transmission housing
A transmission case plug closes a port in the housing so the lubricant stays in and dirt stays out. Plugs like this are usually a simple part, but a seep around the threads often shows up as fluid on the transmission case or under the vehicle after a drive.
When replacing a plug, use the correct thread and a clean sealing surface. Threads damaged during removal may need a tap or a closer look before the new plug goes in. Use a gasket or sealant only where the job calls for it, then check the fluid level and look for leaks on the next few drives.
- Drain the lubricant before removing the plug
- Clean the threads and the housing face
- Check for seepage after the first drive
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 18887.81 |
| Component | Manual transmission case plug |
| Engine | Six-cylinder |
| Warranty | It carries a limited five-year warranty. |
Vehicle fitment
It fits the 1997–2001 Jeep Wrangler (TJ) in the SE, Sahara and Sport trims.
Other Wrangler years, including the JK and JL, are not in the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Remove the old plug with the transmission drained. Clean the threads, and check the fluid level after the new plug is installed.
What’s included
One transmission case plug.









