Overview
The Addictive Desert Designs U11952NA03 is a black bump stop mount with universal fit. Vehicle, model year and suspension type are not known for this kit, so confirm fit for your vehicle’s year, model and trim before ordering.
A bump stop limits how far a suspension can compress. Once the stop contacts its pad or housing, the spring stops compressing and the load moves into the bump stop, which protects the shock from bottoming out and helps keep the axle and driveline from hitting the frame or body.
Key features
- Black finish
- Bump stop mount design
- Universal fit
- Part number U11952NA03
- Brand: Addictive Desert Designs
Before You Buy
A bump stop mount is only useful when its height and pad match the suspension it sits on. Measure the travel you want to allow, the distance to the axle or frame at full compression and the position of the pad before choosing a length. Taking those measurements first makes it clear whether a kit is a match or whether a different mount is needed.
Bump stops wear at the pad, so the contact surface should be checked at regular service intervals. Look for flattening, cracking or tearing and for contact marks on the housing. A worn pad changes where the stop engages, which can load the shock earlier than intended and reduce the protection the stop is meant to give.
- Measure travel and clearance before choosing a length
- Check the pad for flattening, cracks or tearing
- Confirm the stop height at full compression after installing
Specifications
| Brand | Addictive Desert Designs |
|---|---|
| Part number | U11952NA03 |
| Type | Bump stop mount |
| Finish | Black |
| Fitment | Universal fit. |
Vehicle fitment
The kit is universal fit and no vehicle is known for it. Confirm fit for your vehicle’s year, model and trim before ordering.
A bump stop mount has to match the travel, the pad and the housing of a specific suspension, so the vehicle should be confirmed before ordering.
Installation notes
Bump stop mounts are sized to a specific suspension, so the mounting point, the stop length and the clearance to the axle or frame should be measured before the kit is installed. A stop that is too long can load the shock or the mount, and one that is too short lets the axle travel into the frame or body. Confirm the stop height at full compression after the install. Stops that are the wrong length can also wear the pad, so the length should be matched to the travel the owner wants to allow.
What’s included
Contents are not known for this kit. Check the package contents against your installation before starting.









