Overview
The Rugged Ridge 7/8 inch D-Ring Isolator Set (part number 11235.73) is a set of molded polyurethane covers that keep 7/8 inch D-ring shackles from banging against your bumper. The set is universal fit, so it is not tied to a particular model year or vehicle.
Shackle noise is the main problem these isolators solve. Each isolator snaps over the outer perimeter of the shackle, and the included urethane washers sit between the shackle pin and the mounting tab, so contact with nearby surfaces is blocked on all sides. Rugged Ridge also molds the isolators in several colors to suit a personal style or paint scheme.
Key features
- Energy-absorbing polyurethane isolators snap over the shackle perimeter
- Urethane washers isolate the shackle pin from the mounting tab
- Designed to keep every part of the shackle from contacting the bumper
- Made for 7/8 inch shackles, with 3/4 inch shackle versions also offered
- Available in Black, Red, Green, Yellow and Pink
Choosing shackles and isolators together
The shackle and the isolator work as one unit, so the shackle deserves a look before new covers go on. Check the shackle body for flat spots, bends and worn edges, and make sure the pin turns smoothly. A damaged shackle can scratch or tear the isolator, shortening its service life even when the isolator itself is in good shape.
When you add isolators to a shackle set, match every shackle to the same pin diameter. A mixed collection makes it hard to keep the washers and isolators in the right place. Store the isolators with the shackles they fit so the right parts are ready when a recovery starts.
- Inspect the shackle body for flat spots and bends
- Confirm the pin turns smoothly before fitting
- Keep matched shackles and isolators stored together
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 11235.73 |
| UPC | 804314294823 |
| Shackle size | 7/8 inch |
| Isolator material | Energy-absorbing polyurethane |
| Washers | Urethane |
| Colors | Black, Red, Green, Yellow, Pink |
| Kit contents | 2 complete sets: 4 isolators and 8 washers, enough for 4 shackles |
Vehicle fitment
The set is universal fit. It is a shackle accessory rather than a vehicle-specific part, so no model years or chassis codes apply.
Check that your shackles are the 7/8 inch size before ordering, since the isolators are sized to the shackle rather than the vehicle. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Snap each isolator over the shackle body, then place the urethane washers so they separate the shackle pin from the mounting tab. Both steps are needed for the full isolation the set is designed to provide.
What’s included
Two complete sets, containing 4 isolators and 8 urethane washers, enough to cover 4 shackles.
Not included: the D-ring shackles themselves.


















