Overview
The Rugged Ridge 11235.61 is a red urethane D-ring isolator set. Each isolator is molded from energy-absorbing polyurethane and snaps over the outer perimeter of a recovery shackle to keep its body from striking the bumper. Because the parts attach to the shackle, the set is universal fit rather than tied to a vehicle.
The set also includes urethane washers that sit between the shackle pin and the mounting tab, covering that contact point. The shackle size is given as 3/4-inch in one place and 1-inch in another, so measure your shackle before fitting.
Key features
- Molded from energy-absorbing polyurethane
- Snaps over the outer perimeter of the shackle
- Urethane washers separate the pin from the mounting tab
- Red urethane finish
Pairing with other recovery gear
D-ring isolators protect the shackle body and pin from the bumper, but they do not replace other protection on the vehicle. Bumper mounts and tow points that carry a shackle benefit from the same cushioning, so check the bumper and mounting tab for wear at the same time you inspect the set. Soft shackles and recovery straps need a separate check and are not covered by this kit.
Red urethane is easy to spot in a dark recovery bag, which helps when several shackles are carried together. The set is universal fit, so it moves from one vehicle to another as long as the shackle diameter matches. Keep the washers with the isolators when you store the set, since each shackle needs both.
- Inspect the bumper mount where the shackle sits
- Keep soft shackles and straps on a separate check
- Store the washers with their matching isolators
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 11235.61 |
| UPC | 804314294625 |
| Shackle size | 3/4-inch or 1-inch; measure before fitting |
| Color | Red urethane |
| Pack contents | 2 complete sets: 4 isolators, 8 washers |
Vehicle fitment
Universal fit. The set is not vehicle-specific and depends only on the shackle diameter. Because the size is listed two ways, measure the shackle body before use.
A 3/4-inch shackle matches the 3/4-inch size, and a 1-inch shackle matches the 1-inch size.
Installation notes
Place each isolator over the shackle body and seat the washers between the pin and the mounting tab. Check that each pin is fully seated before the shackle takes any load.
What’s included
Two complete sets with 4 isolators and 8 washers.
Not included: D-ring shackles.


























