Overview
The Daystar Locking D-Ring Isolator KU70058RB is a blue polyurethane isolator for standard 3/4 inch D-rings, clevis or shackle. It snaps on to stop rattle and keeps the D-ring from banging against the bumper, while protecting the bumper’s finish. Daystar marks it Universal Fit, so it is not tied to one vehicle.
A built-in lanyard passes through the hole in the D-ring bolt, so the bolt cannot unscrew itself. This part is blue. Other colors in the same line are sold as separate part numbers.
Key features
- Blue polyurethane construction
- Built-in lanyard through the D-ring bolt hole
- Snaps onto a standard 3/4 inch D-ring
- Stops banging against the bumper
- Protects the bumper finish from scratches
- Universal Fit
Locking hardware on the trail
A loose D-ring bolt is a common reason recovery gear rattles or works free over a rough trip. A locking isolator addresses both problems by holding the bolt in place and cushioning contact with the bumper, so the lanyard and polyurethane work together.
Before installing, look at the D-ring bolt and the hole the lanyard passes through. Make sure the lanyard runs freely and does not kink or bind. Seat the isolator fully on the D-ring before any recovery, and recheck the fit after washboard or rocky stretches.
Polyurethane can crack or flatten after long exposure to sun and grit. Wipe the isolator clean, look for splits near the lanyard, and replace it if the lanyard frays or the body no longer snaps firmly onto the D-ring.
- Lanyard runs freely through the bolt hole
- Seat fully before each recovery
- Replace if the lanyard frays
Specifications
| Brand | Daystar |
|---|---|
| Part number | KU70058RB |
| UPC | 618089010416 |
| Color | Blue |
| Material | Polyurethane |
| Fits | Standard 3/4 inch D-ring (clevis or shackle) |
Vehicle fitment
This is a universal accessory and is not vehicle-specific. Fit depends on the 3/4 inch D-ring or shackle size of your recovery point rather than the year, make or model of the vehicle.
No year, make or model is named for this isolator. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The guidance given is to seat the isolator on the D-ring and route the lanyard through the bolt hole. No further steps are stated.
What’s included
One blue Locking D-Ring Isolator.
Not included: the D-ring or shackle it fits onto.









