Overview
The Daystar KU70056BK is a black D-Ring Isolator, a polyurethane sleeve that snaps onto a standard 3/4 inch D-ring or shackle used in winch and recovery rigging. It is a universal accessory rather than a vehicle-specific part, and it works on any recovery point that takes a 3/4 inch shackle. Its job is to keep the shackle from tapping against the bumper while you drive and to keep the shackle from scratching the bumper finish.
Daystar sells these isolators as a pair. The soft polyurethane is meant to cushion the small knocks that cause clicking on rough trails. Daystar also makes Winch Isolators, Jack Isolators, Bump Stops, Dash Panels and Lift and Leveling Kits, so buyers building out a rig can find related pieces from the same brand.
Key features
- Polyurethane construction cushions the shackle against the bumper
- Stops D-Ring rattles while the vehicle is in motion
- Protects anchor points and bumper finish from scratches caused by D-Ring contact
- Snaps into place and can be installed or removed in moments
- Fits any standard 3/4 inch D-ring or shackle
- Comes as a pair
- Limited lifetime warranty
Choosing a recovery point
The isolator works only as well as the hardware it sits on, so the shackle body and D-ring should be checked first. A sleeve that is loose or worn will not hold its position, and it may let metal tap the bumper while driving. Confirm the sleeve grips the shackle snugly before every trip.
When rigging for a recovery, the isolator protects the bumper and anchor point from scratches as the shackle moves. Keep the shackle pin tight and the bow seated correctly, and remove the sleeve if it binds or prevents the shackle from sitting properly on the recovery point. Keep spare sleeves clean and dry.
- Measure the shackle body before buying
- Check the isolator seats fully on the shackle
- Replace torn or cracked sleeves
Specifications
| Brand | Daystar |
|---|---|
| Part number | KU70056BK |
| UPC | 814423018821 |
| Color | Black |
| Material | Polyurethane |
| Fits | Standard 3/4 inch D-rings or shackles |
| Quantity | Pair |
| Warranty | Limited lifetime |
Vehicle fitment
The isolator is universal and is not made for one vehicle. Fit depends on the recovery point: it works with a standard 3/4 inch D-ring or shackle. Confirm the size of your shackle or D-ring before ordering, and confirm fit for your vehicle’s year, model and trim before ordering.
Check the size of your shackle or D-ring before choosing this part. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The isolator snaps over the shackle body and comes off the same way, so it can be moved between recovery points as needed. Measure the shackle or D-ring first, since the fit is stated only for standard 3/4 inch sizes.
What’s included
A pair of black D-Ring Isolators.
Not included: D-rings, shackles or winch rigging hardware.


















