Overview
The Rancho RS66115B Crawler Long Arm Kit is a long arm suspension kit for the 2007 to 2017 Jeep Wrangler JK, including the Rubicon and Unlimited models in 2-door and 4-door form. It has a high-articulation long arm design at the front and rear, with a lift range of 3 to 4.99 inches and support for tires up to 37 inches.
The kit uses progressive rate coil springs and fully adjustable extended length control arms with D2 bushings. Rancho adds heavy-duty front and rear adjustable track bars with D2 bushings to center the axles. The D2 bushings use PTFE, which Rancho says allows the sleeve to turn in the bushing with less resistance and less wear.
The RS66115B replaces the RS66105 and RS66105B kits, and Rancho offers a limited lifetime warranty on the suspension system.
Key features
- High-articulation front and rear long arm design
- Fully adjustable upper and lower control arms with D2 bushings
- Heavy-duty front and rear adjustable track bars
- Progressive rate coil springs at the front and rear
- Fits tires up to 37 inches
- 100 percent bolt-on system
Long arm geometry
Long arm suspension changes how the axle moves through its travel. Longer arms can help the axle articulate and reduce binding on uneven ground, but they also change alignment and driveline angles. Plan an alignment check and a driveline review after the work is complete.
Shocks matter with this type of system. Because the kit is sold without shocks, choose units rated for your lift height and tire size. Inspect shock mounts and bushings after the first few trail trips, since articulation puts more load on those parts than on the road.
Tire size also changes how the suspension performs. Larger tires increase load on the joints and can require gearing changes, so plan related upgrades before fitting bigger rubber.
- Choose shocks rated for the lift height
- Check driveline angles after installation
- Inspect long arm bushings periodically
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS66115B |
| UPC | 39703009058 |
| Suspension type | Long arm |
| Rear lift method | Coil springs |
| Lift height range | 3 to 4.99 inches |
| Tire size | Fits up to 37-inch tires |
| Shocks included | No |
| Warranty | Limited lifetime |
Vehicle fitment
The kit fits the 2007 to 2017 Jeep Wrangler JK, including the Rubicon and Unlimited models in 2-door and 4-door form.
Wrangler JL and TJ models are not covered. Verify the year, model and trim of your vehicle before you order this kit.
Installation notes
A transmission cross member is needed to complete the kit: RS886101 for (2011-07) or RS886102 for (2017-12). Exhaust cross over pipe RS720003 is required for (2017-12) when the front driveshaft is not being replaced. Adjustable track bars center the axles.
What’s included
Progressive rate coil springs, fully adjustable extended length upper and lower control arms with D2 bushings, and heavy-duty front and rear adjustable track bars with D2 bushings.
Not included: shocks, the transmission cross member and the exhaust cross over pipe RS720003 when it is required.







