Overview
The King Shocks 25001-303 is a rear piggyback reservoir shock absorber for 2011 to 2017 GMC Sierra 2500 HD trucks in the Base, Denali, SLE, SLT and WT trims. It comes as a pack of two, one rear driver side and one rear passenger side, and it is a non-adjustable monotube shock with a 2.5 inch body.
King positions this pack as a bolt-on rear shock that works with stock height or with trucks running lifted aftermarket suspensions. The shocks measure 16.13 inch compressed and 25.31 inch extended, and the damping curve and spring rate were custom tuned through King’s real-world testing. The piggyback reservoir is part of the design, so the shock keeps its fluid separate from the main body.
Key features
- Non-adjustable damping with no external adjuster
- Monotube internal design
- Hard anodized 6063 aluminum alloy body
- Heat treated 6061 aluminum alloy piston
- Wear bands made from a Rulon composite, which King describes as highly wear resistant
- 2.5 inch body diameter
- Pack of two, rear driver and passenger side
- Easy bolt-on installation for stock height or for custom kits on lifted trucks
Rear suspension and piggyback reservoirs
A piggyback reservoir sits alongside the shock body rather than on the hose, which keeps fluid volume separate from the main cylinder. Because the reservoir is mounted on the outside of the shock, check that it clears the frame, the spare tire carrier or other rear components through full travel. Route any hardware so it stays out of the way of moving parts.
Rear shocks wear gradually, so a change in ride quality is often the first sign. Look for fluid on the body, bounce after bumps and uneven tire wear. Replace rear shocks as a pair so both sides control the axle in the same way, and re-check the mounting bolts after the first few drives.
- Check reservoir clearance through full travel
- Look for fluid on the body
- Replace rear shocks as a pair
Specifications
| Brand | King Shocks |
|---|---|
| Part number | 25001-303 |
| UPC | 700006809910 |
| Position | Rear |
| Quantity | 2 per pack |
| Adjustment type | Without adjuster |
| Compressed length | 16.13 inch |
| Extended length | 25.31 inch |
| Body diameter | 2.5 inch |
| Reservoir type | Piggyback |
| Body material | Hard anodized 6063 aluminum alloy |
| Piston material | Heat treated 6061 aluminum alloy |
| Wear bands | Rulon composite |
Vehicle fitment
It fits 2011–2017 GMC Sierra 2500 HD in the Base, Denali, SLE, SLT and WT trims. The 1500 and 3500 Sierra models are outside this fit.
Front shocks and other GM trucks are not part of this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
These are bolt-on rear shocks, so the factory mounting points are the intended attachment. Check the compressed and extended lengths against the rear ride height on your truck before fitting them. Install the pair together so the rear suspension stays balanced.
What’s included
The pack contains two shock absorbers, one for the rear driver side and one for the rear passenger side. Check the package contents against your installation before starting.
Not included: Front shocks are not part of this pack.









