Overview
The Icon Suspension 56506 is a rear shock in the 2.0 Aluminum Series for the 2007-2017 Toyota Tundra, sized for a 0 to 1.5 inch lift. It fits the 1794 Edition, Base, Limited, Platinum, SR, SR5 and TRD Pro trims.
The shock uses a nitrogen charged monotube design with an internal reservoir and a one piece linear/digressive piston. Its 6063 anodized aluminum body and reservoir tubing offer heat dissipation and corrosion resistance.
Key features
- Built for a 0 to 1.5 inch lift
- Nitrogen charged monotube with internal reservoir
- Polyurethane bushings and zinc plated sleeves for OE type fitment
- Buna top out bumper for noise free operation
- 100% rebuildable and 100% revalveable
Rear shock wear and replacement
Rear shocks on a Tundra carry the load of bed cargo and towing, so wear shows up as sag, bounce or a rough feel over expansion joints. Look for fluid on the shock body and check the rubber bushings at each end. A worn rear shock can also make the truck rock after a stop, which affects control when the bed is loaded.
Replacing a rear shock is a good time to check the springs, bump stops and rear suspension bushings. Keep the truck’s rear ride height in mind when choosing a shock, since a lift range that fits the setup helps the suspension work as designed. Recheck the mounting bolts after the first drives to keep the hardware secure.
- Check bump stops and springs during replacement
- Inspect rubber bushings at both ends
- Recheck mounting bolts after the first drives
Specifications
| Brand | Icon Suspension |
|---|---|
| Part number | 56506 |
| UPC | 70000623651 |
| Position | Rear |
| Lift height | 0 to 1.5 in |
| Series | 2.0 Aluminum Series |
| Shaft | 5/8 inch polished nitro steel |
| Body and reservoir tubing | 6063 anodized aluminum |
| Shock oil | Premium grade 5WT |
Vehicle fitment
Fitment covers the 2007-2017 Toyota Tundra (1794 Edition, Base, Limited, Platinum, SR, SR5, TRD Pro).
Tundra models from 2018 onward fall outside this fit. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Check your truck’s rear ride height before fitting, since this shock is sized for a 0 to 1.5 inch lift.
What’s included
The package contains one rear shock absorber. Check the package contents against your installation before starting.