Select your vehicle

BAK Revolver X2 Hard Roll Up Truck Tonneau Cover – 39506

BAK Industries

$1,399.99Currently unavailable
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 20, 2026 4:40 PM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Fits Nissan Frontier 2005–2021 and Suzuki Equator 2009–2012
  • BAK Industries hard roll-up tonneau cover, part number BKI39506
  • Automatic rotational locking rails fitted to each side of the bed
  • Composite locking blocks and marine-grade vinyl finish
  • Manual operation; rack compatible, not toolbox compatible

Description

Overview

The BAK Revolver X2 hard roll-up tonneau cover, part number BKI39506, is a direct fit for two midsize pickups: the Nissan Frontier from 2005 through 2021 and the Suzuki Equator from 2009 through 2012.

Automatic rotational locking rails are fitted to each side and extend the entire length of the bed. Composite locking blocks hold the cover when it is closed and locked, and the manually operated roll-up panels carry a marine-grade vinyl finish.

Key features

  • Hard roll-up cover with manual operation
  • Automatic rotational locking rails on both sides
  • Composite locking blocks for closed-and-locked security
  • Flush, no-profile design
  • Marine-grade vinyl finish

Midsize bed considerations

Midsize pickups have shorter beds than full-size trucks, so a roll-up cover leaves less room for bulky gear when it is rolled back. Think about the load you carry most often. Ladders, kayaks and lumber can usually sit on the bed floor under a closed cover, but tall items may need a rack or a roof-mounted carrier instead.

A rack-compatible design lets you add a crossbar setup on top of the closed panel, which helps with long loads. Check how rack clamps interact with the rails before mounting, and keep the seal area clear so the cover still closes flat. Inspect the seals and rail covers periodically and after rough trail use, since debris trapped there is a common cause of a noisy or uneven cover.

  • Clear the seal channel before closing the cover
  • Confirm rack clamp positions do not press on the rails
  • Keep tie-down points free of grit

Specifications

Brand BAK Industries
Part number BKI39506
Material Hard
Tonneau type Roll-Up
Operation Manual
Fitment Direct Fit
Toolbox compatible No
Rack compatible Yes
Finish Marine-grade vinyl

Vehicle fitment

It fits the 2005–2021 Nissan Frontier in Desert Runner, LE, Nismo Off-Road, PRO-4X, S, SE, SL and SV trims, and the 2009–2012 Suzuki Equator in Base, RMZ-4 and Sport trims.

Frontier model years before 2005 or after 2021 and Equator model years outside 2009 to 2012 are not on this list. Confirm your vehicle’s year, model and trim before ordering.

What’s included

Before installing, compare the contents with the parts you have on hand for your truck.

SKU: BKI39506 Categories: ,

Fitment

VehicleYearsTrims
Nissan Frontier2005–2021Desert Runner, LE, Nismo Off-Road, PRO-4X, S, SE, SL, SV
Suzuki Equator2009–2012Base, RMZ-4, Sport

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does part number BKI39506 fit a 2005 Nissan Frontier?

Yes, it fits the 2005 Nissan Frontier. Coverage starts at 2005, with trims that include S, SE, SV, PRO-4X and Nismo Off-Road. Verify fit for your exact year, model and trim before buying.

Does the cover fit the Suzuki Equator?

Yes, the 2009 through 2012 Suzuki Equator is covered in Base, RMZ-4 and Sport trims. Equator model years outside that range are not covered, so confirm your year before ordering.

What is the part number for the Frontier and Equator tonneau?

The part number is BKI39506. It is a hard, roll-up, manually operated tonneau with a direct fit design. The cover is rack compatible and not toolbox compatible, so it does not work with a bed-mounted tool box.

Can a midsize cover be used with a tool box?

Not with this design, since the cover is not toolbox compatible. Use a separate rack or cargo system for tools, and keep heavy tool boxes off the closed panel.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon