Overview
The Dana Spicer 49766 is a wheel bearing retainer ring for the rear Dana 44 axle shaft. It is an OE replacement that Dana Spicer makes in the USA, sized at 2 inches outside diameter, 1.372 inch inside diameter and 0.57 inch thick.
It fits the 2007-2011 Jeep Wrangler (JK), the 2004-2006 Wrangler (LJ) Unlimited and Unlimited Rubicon, and the 1999-2006 Wrangler (TJ).
Key features
- Retainer ring for the rear Dana 44 axle shaft
- OE replacement part, made in the USA
- Outside diameter 2 inches, inside diameter 1.372 inch
- Thickness 0.57 inch
Before you replace the ring
The retainer ring holds the wheel bearing in place on the axle shaft, so its job is simple but important. When the ring is removed, the bearing, the bearing bore and the axle shaft seating area should all be inspected for scoring, heat marks or wear. A bearing that has moved on the shaft often needs replacing along with the ring, since the ring alone cannot correct a bearing that has walked out of position.
Rear axle bearings on a Dana 44 are commonly serviced as a set with the seal and retainer, and a bent or deformed ring should never be reused. Seat the new ring squarely and confirm the bearing sits fully against it before installing the hub or axle components. Recheck bearing play after the first short drive to confirm the assembly is seated correctly.
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | 49766 |
| UPC | 23913250645 |
| Axle | Dana 44, rear axle shaft |
| Outside diameter | 2 inches |
| Inside diameter | 1.372 inch |
| Thickness | 0.57 inch |
| Made in | USA |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2007–2011 Jeep Wrangler (JK), the 2004–2006 Wrangler (LJ) Unlimited and the 1999–2006 Wrangler (TJ). All of these use the Dana 44 rear axle.
The JK entry stops at 2011, so confirm the model year before ordering a 2012 or later Wrangler JK. The list does not include the Cherokee or the Grand Cherokee. Confirm your vehicle’s year, model and trim before ordering.
What’s included
This part is a single retainer ring.









