Overview
The Warn VR10-S GEN II is a 10000lb winch, part number 96815, with a listed line pull of 10000 and a synthetic rope line. Its convertible control pack can be set up for upright or low-profile mounting.
The 10,000 lb. capacity suits vehicles such as the Jeep JKU, half-ton pickups and many SUVs.
Key features
- Convertible control pack for upright or low-profile mounting
- Waterproof Albright contactor for winch control
- One-piece tie plate in place of multiple tie bars
- Cone brake rated to hold the full-rated load
- Synthetic rope line with a hawse fairlead
- 12 Feet Lead remote control
Choosing a winch line
Synthetic rope behaves differently from steel cable on the trail. It floats, is lighter to handle and does not kink the way wire can, which makes it easier to spool by hand. It does not tolerate sharp edges or abrasion well, so route it over a fairlead and keep it clear of rocks during pulls. Protect the rope from heat, since high temperatures can weaken synthetic fiber over time.
When choosing a winch setup, the rope is only one part of the system. The control pack, contactor and cone brake all work together, so a mounting position that keeps the remote lead and pack accessible makes operation simpler. Check that the bumper or mount carries the rated load before spooling out a full line, and remember that a winch is a pulling tool rather than a lifting tool.
Routine care keeps the winch ready. After muddy or wet use, rinse the drum and rope where practical, let them dry, and inspect the rope for fraying, cuts or melted spots. Replace a damaged rope before the next recovery. Recheck the mounting bolts after the first few trail runs, since vibration can loosen them.
Specifications
| Brand | Warn |
|---|---|
| Part number | 96815 |
| UPC | 12748968153 |
| Capacity (title) | 10000lb |
| Line pull | 10000 |
| Line type | Synthetic Rope |
| Fairlead | Hawse |
| Remote control | 12 Feet Lead |
| Control pack | Convertible, upright or low-profile |
| Contactor | Waterproof Albright |
| Brake | Cone brake |
Vehicle fitment
The winch is a universal fit. Treat the Jeep JKU and truck examples as capacity references, and confirm mounting and bumper fit for your own vehicle before ordering.
Confirm frame strength and bumper design for your vehicle’s year, model and trim before ordering.
Installation notes
Choose upright or low-profile mounting for the control pack before the winch is fixed in place, since the pack is convertible. Keep hands and loose clothing clear of the rope and fairlead during operation.
What’s included
The winch comes with a 12 Feet Lead remote control.
Not included: A winch mount or bumper is not included with the winch.









