Overview
The Warn 16296 is a 3-pin electrical plug, part number 16296, offered as a replacement for Warn winches. Its three pins mean it mates with a 3-pin connector, so it is matched to the winch rather than to a truck or Jeep model.
Check the rating and wire size against your winch before fitting the plug.
Connector care and wiring checks
A winch plug carries control power and must make a clean, tight connection every time it is mated. Corrosion, bent pins and loose housings are common causes of intermittent winch operation. Before reconnecting, look at the pin faces and the seal around the housing, and confirm the plug latches fully so vibration cannot pull it apart on the trail.
Electrical parts are matched by connector type, pin count and the wiring they serve, so the winch model should be confirmed before ordering. Dielectric grease can help keep moisture out of a sealed connector, but use only the type suited to automotive connectors. Keep the wiring routed away from sharp edges and heat sources, and secure it so the plug does not carry the weight of the cable.
- Check pins for bending, corrosion or discoloration
- Confirm the locking tab engages fully
- Replace a plug with a cracked or swollen housing
Specifications
| Brand | Warn |
|---|---|
| Part number | 16296 |
| UPC | 12748162964 |
| Pin count | 3 |
| Part type | 3-pin electrical plug |
| Fitment | Universal fit |
Vehicle fitment
It is a Universal Fit plug, so the winch connector decides the match rather than the truck.
Check the connector type on your winch first. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Disconnect the battery before changing any winch wiring, and confirm the plug seats fully before reconnecting power.
What’s included
The entry covers a 3-pin plug, part number 16296.
Not included: the winch and any wire or terminals the plug connects to.









