Overview
The Warn PullzAll 110V AC corded 1000 lb version, part number 885000, is a handheld electric pulling and lifting tool rated for up to 1,000 lbs. It is the corded AC model, used where a come-along or chain fall would otherwise be needed. It has variable speed control and an electronic load limiter for moving heavy items into place.
The PullzAll suits tradespeople, farmers and ranchers, and anyone who needs to lift or pull heavy loads. Typical uses include construction, pipe fitting, iron work, equipment and plant maintenance, farm and ranch work, auto shops, garages, machine shops, home improvement, hunting and camping. It is a practical alternative to manual pulling methods for these jobs.
Key features
- Lifts or pulls up to 1,000 lbs (454 kg)
- Corded 110V AC operation
- Forward and reverse switch with a variable speed trigger
- Electronic load limiter with LED indicator
- Dynamic brake with no clutch
- Wire rope 15 ft x 7/32 (4.57m x 5.5mm)
Planning a corded pull
A corded tool needs a steady power source, so set up near a grounded 110V AC outlet and use an extension cord rated for the tool’s load. Route the cord away from the wire rope, the pulling path and any moving parts, so it cannot be snagged or pinched while a load is on the line.
Good preparation makes a pull safer. Choose a solid anchor point, secure the load so it cannot slide, and keep people out of the line of pull. Inspect the wire rope before each job for kinks, flattened sections and broken strands, since damage on a rope under tension can fail suddenly.
- Use a grounded 110V AC outlet
- Inspect wire rope for kinks and broken strands
- Keep the cord away from the rope and moving parts
Specifications
| Brand | Warn |
|---|---|
| Part number | 885000 |
| UPC | 1274803731 |
| Model | PullzAll 110V AC corded 1000 lb version |
| Lifting/pulling capacity | 1,000 lbs (454 kg) |
| Power | 110V AC, corded |
| Switch | Forward/reverse |
| Trigger | Variable speed |
| Load limiter | Electronic, with LED |
| Clutch | None |
| Brake | Dynamic |
| Wire rope | 15 ft x 7/32 (4.57m x 5.5mm) |
| Line type | Wire |
| Fairlead | None |
| Remote control | Direct switch |
| Winch type | Utility industrial |
| Weight | 15 lbs (6.8 kg) |
| Warranty | 1 Year Limited |
| Fitment | Universal fit |
Vehicle fitment
The PullzAll is a handheld tool rather than a vehicle part, so vehicle fitment does not apply. It is universal fit, so it suits lifting and pulling tasks rather than a particular make, model or year. Check the power supply against the 110V AC requirement before use.
The PullzAll is a corded 110V AC tool, so confirm the power supply is 110V AC before use.
Installation notes
Because this is a corded AC tool, plan for a 110V AC outlet and keep the cord clear of the wire rope and moving parts. Keep people out of the path of the wire rope while a load is on it.
What’s included
The PullzAll 110V AC corded tool with its 15 ft x 7/32 wire rope is the product covered by part number 885000.
Not included: The PullzAll 110V AC corded tool comes with its 15 ft x 7/32 (4.57m x 5.5mm) wire rope. Check the package contents against your setup before use, and plan for any mounting hardware or extra attachments separately.












