Overview
The Warn Vantage 4000-S is a 4000 lb electric winch for Side x Side owners, catalogued as model 89041 with UPC 12748890416. It has a sturdy design with big pulling power, suited to heavier Side x Sides.
The winch uses a 1.4 HP permanent magnet motor on 12V with a 3-stage planetary gear train at 180:1. The brake is spring-type, and the motor and drive train are fully sealed. The gear housing is high-strength composite with all-metal gears. A dash mounted rocker controls the winch, and the cable is 50 ft of synthetic rope. The winch type is ATV and UTV.
Key features
- 4000 lb rated pull with 50 ft of synthetic rope
- 1.4 HP permanent magnet motor on 12V
- 3-stage planetary gear train at 180:1
- Spring brake
- Fully sealed motor and drive train
- High-strength composite gear housing with all-metal gears
- Aluminum hawse fairlead
Side x Side winch setup
A winch on a Side x Side is a recovery tool that works best when it is mounted square and the cable runs straight out. Plan the mounting position around the frame and the approach you usually take. Check that the winch clears bodywork and any front-end accessories when the steering turns.
The sealed motor and drive train suit mud and water crossings, but the rope and electrical connections still need attention. After wet trips, wipe the rope, look at the rocker wiring and make sure the connections are dry before the next pull.
Dash-mounted controls should sit where the operator can reach the rocker without leaning across the cab, with the lead kept clear of moving parts.
- Keep hands away from line under load
- Fuse the motor feed close to the battery
- Re-check the mounting after rough runs
Specifications
| Brand | Warn |
|---|---|
| Part number | 89041 |
| UPC | 12748890416 |
| Rated line pull | 4000 lbs |
| Winch motor | 1.4 HP permanent magnet |
| Voltage | 12V |
| Control | Dash mounted rocker |
| Gear train | 3-stage planetary |
| Gear reduction ratio | 180:1 |
| Braking action | Spring |
| Drum size | 2.25 in diameter x 4.7 in length |
| Cable | Synthetic 7/32 x 50 |
| Fairlead | Aluminum hawse |
| Winch type | ATV and UTV |
| Overall dimensions | 14.57 in L x 4.53 in W x 4.69 in H |
| Weight | 15.45 |
| Warranty | Limited 5yr warranty |
Vehicle fitment
The winch type is ATV and UTV, so it is aimed at Side x Side owners. Check the mounting position and the 14.57 in overall length against your frame before fitting it.
No close model is named, so no generation is excluded by name. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
No bolt pattern is listed, so measure the mounting bracket against the winch before drilling. Keep the dash rocker wiring away from moving parts and fuse the motor feed. Keep hands away from the synthetic line under load.
What’s included
The specifications list a 50 ft synthetic cable, an aluminum hawse fairlead and a dash mounted rocker control.
Not included: a mounting bracket. Confirm what is supplied before ordering.












