Overview
The Warn 29071 is a standard manual hub kit with flange style mounting, made for a 27-spline outer axle. It works as a manual replacement for factory hubs and carries a chrome finish in its specifications.
Warn describes these standard hubs as OEM-style replacement hubs. They share a 4140 steel clutch ring and inner drive gear with its premium hubs, along with a precision cast hub body.
Key features
- Flange style mounting
- Built for 27-spline outer axles
- 4140 steel clutch ring and inner drive gear
- Precision cast hub body
- Plastic center knob
- Limited lifetime warranty
Choosing the right hubs
Manual hubs are a common upgrade for owners who want to disconnect the front wheels from the axle shafts by hand. The right choice depends on the axle outer spline count and the mounting style, because a mismatch will prevent the hub from seating or engaging correctly. Flange style mounting is a common arrangement for this type of hub, so compare the hub body with the axle you have before ordering.
Standard manual hubs rely on a steel clutch ring and inner drive gear, so their condition matters once the kit is installed. Keep the dial and gears clean, and check the seal for cracks or grease leaks during routine service. Plastic center knobs can crack if they are overtightened or exposed to heat, so handle them with care during installation.
- Match the axle outer spline count
- Confirm the mounting style before ordering
- Grease the gears and check seals during service
Specifications
| Brand | Warn |
|---|---|
| Part number | 29071 |
| UPC | 12748290711 |
| Hub type | Standard manual |
| Outer axle | 27 splines |
| Mounting | Flange style |
| Outer body | All black |
| Finish | Chrome |
| Knob material | Plastic |
| Clutch ring | 4140 steel |
| Warranty | Limited lifetime |
Vehicle fitment
No vehicle list is published for this kit. It is matched by hub type and axle spline count: 27 splines with flange style mounting.
Very early 1990 models with 23-spline axles are not covered by this kit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
When replacing factory automatic hubs with manual hubs, Warn requires part number 32720 as well. Very early 1990 models with 23-spline axles need the 1989 model hubs and nut kit instead.
What’s included
One standard manual hub kit.
Not included: WARN part number 32720, which is required when replacing factory automatic hubs.









