Overview
The Warn 60459 is a set of premium manual locking hubs in chrome for 26 spline outer axles. Warn lists them for one vehicle: the 1995-2001 Toyota Tacoma.
Warn builds the premium hub from metal throughout, including a zinc aluminum alloy dial that Warn expects to keep working for years. The dial needs a full 9/10ths of a turn to bring the inner drive gear into contact with the clutch ring, and an internal wave spring with heavy detents keeps it there.
The finish is chrome with a metal knob, and the hubs carry a limited lifetime warranty.
This hub fits the 1995–2001 Toyota Tacoma. Later Tacoma model years are not covered, so check the model year carefully.
Tacoma owners considering this hub should note that the 1995-2001 Tacoma and the 4Runner of the same period share much of their front end, yet Warn publishes a different part number for each. That is a reminder to rely on the part number and fitment list, not on the family resemblance between models.
The chrome finish and metal knob give a bright look at the wheel, but the practical benefit is the lock itself: with the dial turned, the front axle shafts are tied to the wheels for four-wheel drive, and with the dial released the wheels turn free of the drivetrain.
Key features
- Chrome premium manual locking hubs
- 26 spline outer axles
- Metal knob
- All metal construction
- Zinc aluminum alloy dial
- Limited lifetime warranty
Tacoma axle and hub notes
Hubs of this type sit at the wheel end, so they work only when the axle, spindle and wheel hub arrangement matches the design they were made for. Before fitting, look over the axle shaft and bearings for wear. A worn bearing can make a locked hub feel loose or noisy.
Manual hubs are often replaced in pairs so both sides engage the same way. After installation, lock and unlock them in a safe spot to confirm full engagement. Engage four-wheel drive only after both hubs are fully locked, and avoid turning them under load.
- Replace hubs in pairs for even engagement
- Inspect axle shaft splines for wear
- Test engagement in a safe location
- Keep seals clean and check for grease leaks
Specifications
| Brand | Warn |
|---|---|
| Part number | 60459 |
| UPC | 1274860459 |
| Product type | Premium manual locking hubs |
| Spline count | 26 splines, outer axles |
| Finish | Chrome |
| Knob material | Metal |
| Warranty | Limited lifetime |
| Fit type | Direct fit |
Vehicle fitment
The manufacturer fitment list for the Warn 60459 includes: 1995–2001 Toyota Tacoma (Base, Limited, Pre Runner, SR5).
Warn names only the Toyota Tacoma from 1995 to 2001. Later Tacoma generations and the Toyota Pickup and 4Runner are not covered by this part number. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Locking hubs sit at the wheel end, so check wheel bearing preload when installing. Mounting a manual hub on a Tacoma that has automatic hubs may need extra parts, so confirm with Warn before ordering.
What’s included
- Premium manual locking hubs, part number 60459








