Overview
The Warn Premium Manual Locking Hubs 34581 are chrome manual locking hubs for 26 spline outer axles with a 6 bolt flange style mounting.
This hub is built for hardcore off-roaders and truck owners. It has all metal construction and a zinc aluminum alloy dial that needs a full 9/10ths of a turn to fully engage the inner drive gear with the clutch ring. A thick internal wave spring and heavy dial detents keep the hub engaged. It is not for use with front axle disconnect systems.
Manual locking hubs let the driver lock or unlock the front wheels from the drive axle by turning a dial. The Premium Hub is made for hardcore off-roaders and truck owners who want industry standard performance.
The dial needs a full 9/10ths of a turn to fully engage the inner drive gear with the clutch ring. A thick internal wave spring and heavy dial detents keep the hub engaged, and the hub is built to withstand hard use.
Key features
- For use with 26 spline outer axles
- 6 bolt flange style mounting
- All metal construction
- Zinc aluminum alloy dial; metal knob, chrome finish
- Dial turns a full 9/10ths for positive engagement
- Thick internal wave spring and heavy dial detents
- Not for use with front axle disconnect systems
- Limited lifetime warranty
Locking hub care and checks
Locking hubs connect the front wheel to the axle shaft only while they are engaged. When they are unlocked, the wheels spin freely on their bearings, which cuts drag on the front driveline during highway driving. When they are locked, axle torque reaches the wheel, which helps on loose, steep or uneven ground. Because the hub sits between the wheel and the driveline, it takes repeated load, water and heat, so its condition matters more on trail use than on pavement.
Engagement is the main thing to watch. A hub that does not fully engage can slip under load, and worn dial detents or a tired spring may let the dial feel loose or fail to lock. Before a trip, turn the dial through its full travel, lock and unlock the hub, and confirm the wheel moves with the axle in both directions. Look for grease leaks and rust around the dial, and check again after any deep water or mud run.
- Turn the dial through full travel before each trip
- Look for grease seepage around the hub body
- Note any clicking or wheel play while locked
Specifications
| Brand | Warn |
|---|---|
| Part number | 34581 |
| UPC | 12748345817 |
| Part type | Manual locking hubs |
| Spline | 26 splines (outer axle) |
| Mounting | 6 bolt flange style |
| Construction | All metal |
| Knob material | Metal |
| Finish | Chrome |
| Warranty | Limited lifetime warranty |
| Fit type | Direct fit |
Vehicle fitment
The hub is a direct fit for 26 spline outer axles with a 6 bolt flange. Check the spline count and flange style against your vehicle’s front axle, and make sure the year, make, model and trim match before ordering.
The hubs are not for use with front axle disconnect systems. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Axle, hub and driveline work is safety-critical, so professional installation is recommended. Follow a proper service procedure for your vehicle, tighten fasteners to the correct torque, and re-check them after the first miles of driving.
What’s included
The package is a set of manual locking hubs. Check the package contents against your installation before starting.
Not included: Hardware and gaskets are not included in the package.









