Overview
The Warn 39128 is a service kit for Warn premium manual locking hubs, designed for Warn part numbers 29070 and 29071. It covers the Ford Bronco II, Explorer, Explorer Sport and Ranger and the Mazda B2300, B3000, B4000 and Navajo, for the model years noted in Vehicle fitment.
A hub service kit gathers the small wear items needed to rebuild one locking hub. The kit includes the snap rings, gaskets, retaining bolts and O rings required for your style of hub. It refreshes a hub you already own and does not replace the hub body, dial or knob.
Since each kit rebuilds a single hub, a pair of hubs needs two kits.
Rebuilding is worthwhile when the hub body and dial are sound but the seals have aged. The kit supports hubs from the Bronco II and Explorer era as well as the Mazda trucks that shared parts with the Ranger.
Key features
- Rebuild kit for one Warn premium manual locking hub
- Made for Warn 29070 and 29071
- Snap rings, gaskets, retaining bolts and O rings
- Parts selected to suit your hub style
- Direct fit for listed Ford and Mazda trucks
Before starting a hub rebuild
Rebuilding a hub starts with the right workspace. Clean the hub thoroughly, lay the parts out in order and photograph the stack before disassembly. Clean the sealing surfaces carefully, since a scratch on a gasket face can cause a leak after reassembly.
Check the hub body, dial and knob before spending time on a rebuild. If the dial no longer engages smoothly or the knob is cracked, the seals are not the only problem. Worn internal parts are not in a service kit, so they may need separate replacement. While the hub is apart, inspect the wheel bearings and grease them as part of routine front axle service.
Torque the bolts to the value called for by the axle, and recheck them after the first few drives, since new gaskets can settle.
Specifications
| Brand | Warn |
|---|---|
| Part number | 39128 |
| UPC | 1274839128 |
| Product type | Premium manual locking hub service kit |
| Used with | Warn part numbers 29070 and 29071 |
| Contents | Snap rings, gaskets, retaining bolts, O rings |
| Hubs per kit | One |
| Fit type | Direct fit |
Vehicle fitment
The manufacturer fitment list for the Warn 39128 includes: 1984–1989 Ford Bronco II (Base, Eddie Bauer, XL, XL Sport, XLS, XLT, XLT Plus); 1991–1994 Ford Explorer (Eddie Bauer, Limited, XL, XLT); 1991–1994 Ford Explorer Sport; 1983–1997 Ford Ranger (Base, Custom, GT, S, S Plus, STX, Splash, Sport, XL, XL Sport, XLS, XLT); 1995–1996 Mazda B2300 (Base, SE); 1994–1996 Mazda B3000 (Base, SE); 1994–1997 Mazda B4000 (Base, LE, SE); 1991–1994 Mazda Navajo (DX, LX).
Warn lists Ford and Mazda trucks only, such as the Ranger for 1983-1997 and the Explorer for 1991-1994. Other Ford trucks, like the F-150, and other Warn hub numbers are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Rebuilding a locking hub means removing snap rings and retaining bolts, so keep the parts in order and note how the old gaskets sat. Replace every O ring and gasket in the kit rather than reusing old ones.
What’s included
- Snap rings
- Gaskets
- Retaining bolts
- O rings
Not included: Hub bodies, dials or knobs.









