Overview
The Warn 29091 is a set of premium manual locking hubs with a chrome finish, built for a 28 spline outer axle and a 6 bolt flange mount. Warn lists them for the Nissan D21, Frontier, Pathfinder, Pickup and Xterra, each within a specific year range.
Stud kit WAR38803 comes with the hubs. Unlike the other chrome hubs in the Warn range, this one has a plastic knob over an all metal body and a zinc aluminum alloy dial.
A thick wave spring and heavy detents hold the hub in engagement. The dial needs 9/10ths of a full turn to seat the inner drive gear on the clutch ring. A lifetime limited warranty applies.
The hub fits the Nissan D21, Frontier, Pathfinder, Pickup and Xterra, with the years for each model set out below. Match the model year and trim to those years before buying.
Key features
- Chrome premium manual locking hubs
- Fits 28 spline outer axles
- 6 bolt flange style mounting
- Stud kit WAR38803 included
- Plastic knob
- All metal body and zinc aluminum alloy dial
- Limited lifetime warranty
Locking hub maintenance
Locking hubs disconnect the front wheels from the axle shafts, which reduces drag and wear on the front driveline when the vehicle is in two-wheel drive. Engagement and release depend on the dial, the clutch ring and the wave spring, so smooth operation is a sign the mechanism is healthy. A hub that is hard to turn, slips or sounds rough should be checked before further use, because it can leave the front wheels unexpectedly engaged or disengaged.
Clean the hub body and check the seals and grease condition at regular service intervals, and replace any worn seal or damaged spring. Wheel bearing play can also affect hub engagement, so inspect bearings when the hubs are serviced. Use the torque figure for your vehicle on wheel fasteners after the hubs go on, then recheck after the first few drives.
Specifications
| Brand | Warn |
|---|---|
| Part number | 29091 |
| UPC | 12748290919 |
| Product type | Premium manual locking hubs |
| Spline count | 28 splines, outer axle |
| Mounting | 6 bolt flange style |
| Finish | Chrome |
| Knob material | Plastic |
| Included hardware | Stud kit WAR38803 |
| Warranty | Limited lifetime |
| Fit type | Direct fit |
Vehicle fitment
The manufacturer fitment list for the Warn 29091 includes: 1994 Nissan D21 (XE); 1998–2001 Nissan Frontier (SC, SE, XE); 1990–2001 Nissan Pathfinder (LE, SE, XE); 1995–1997 Nissan Pickup (SE, XE); 2000 Nissan Xterra (SE, XE).
Warn lists Nissan models only, for example the Pathfinder for 1990-2001 and the Xterra for 2000. Later Frontier and Xterra generations, and other makes, are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The included stud kit supports the 6 bolt flange mounting, so separate studs are not needed. Locking hubs mount at the wheel end, so check the wheel bearings during installation and torque the wheel fasteners to the figure for your vehicle.
What’s included
- Premium manual locking hubs, part number 29091
- Stud kit, part number WAR38803









