Overview
The Warn 9790 is a standard manual locking hub kit for 19 spline outer axles on internal style wheel hubs. It fits a wide range of Chevrolet, Dodge, Ford, Geo, GMC, International and Jeep trucks and SUVs.
A standard hub is a replacement for the factory hub. The kit carries a 4140 steel clutch ring and inner drive gear in a precision cast body, the same construction as the premium line.
The outer housing is chrome with a black center knob made of plastic. A limited lifetime warranty applies.
Two vehicle conditions matter. Warn says full time 4WD vehicles require a transfer case conversion, and vehicles with 3 bolt automatic hub covers require spindle nut kit WAR 32720.
With over fifty fitment entries, this is among the widest-fitting hub kits in the Warn range. The list reaches from 1960s Ford trucks to 1990s Geo and Jeep models, so always check the year and the wheel hub style as well as the model.
Key features
- Standard manual locking hub kit
- 19 splines
- For internal style wheel hubs
- Chrome outer housing, black center knob
- 4140 steel clutch ring and inner drive gear
- Limited lifetime warranty
Hub kit maintenance and wear
Manual locking hubs engage the front axle to the wheel only when turned on, so their condition affects four-wheel drive use. Over time the clutch ring and drive gear can wear, and the hub body can collect dirt and corrosion. Check the hubs periodically, especially after off-road use in mud, sand or water.
Signs of worn hubs include a knob that is hard to turn, a hub that will not fully engage or release, grinding noises or grease leaking past the seals. Because the hubs sit at the wheel end, wheel bearing checks are a good time to inspect them. Replace worn parts before they damage the axle, and keep the knob and housing clean so the controls stay easy to operate.
Specifications
| Brand | Warn |
|---|---|
| Part number | 9790 |
| UPC | 12748979005 |
| Product type | Standard manual locking hub kit |
| Spline count | 19 splines, outer axles |
| Wheel hub style | Internal |
| Finish | Chrome outer housing |
| Knob | Black center knob, plastic |
| Clutch ring and inner drive gear | 4140 steel |
| Warranty | Limited lifetime |
| Fit type | Direct fit |
Vehicle fitment
The manufacturer fitment list for the Warn 9790 includes: 1969–1974, 1987–1991 Chevrolet Blazer; 1969–1986 Chevrolet K10; 1969–1986 Chevrolet K10 Suburban; 1977–1986 Chevrolet K20; 1969–1986 Chevrolet K20 Suburban; 1975–1986 Chevrolet K5 Blazer; 1987 Chevrolet V10; 1987–1988 Chevrolet V10 Suburban; 1989–1991 Chevrolet V1500 Suburban; 1987 Chevrolet V20; 1987–1988 Chevrolet V20 Suburban; 1989–1991 Chevrolet V2500 Suburban; 1974, 1980–1993 Dodge Ramcharger; 1969–1974, 1984–1989 Dodge W100; 1980–1993 Dodge W150; 1980 Dodge W200; 1981–1993 Dodge W250; 1966–1996 Ford Bronco; 1975–1977 Ford Bronco Sport; 1960–1976 Ford F-100; 1976–1996 Ford F-150; 1960–1975, 1977–1997 Ford F-250; 1997 Ford F-250 HD; 1989–1997 Geo Tracker; 1970–1991 GMC Jimmy; 1975–1978 GMC K15; 1975–1978 GMC K15 Suburban; 1969–1974 GMC K15/K1500; 1969–1974 GMC K15/K1500 Suburban; 1979–1986 GMC K1500; 1979–1986 GMC K1500 Suburban; 1977–1978 GMC K25; 1975–1978 GMC K25 Suburban; 1969–1974 GMC K25/K2500 Suburban; 1979–1986 GMC K2500; 1979–1986 GMC K2500 Suburban; 1987 GMC V1500; 1987–1991 GMC V1500 Suburban; 1987 GMC V2500; 1987–1991 GMC V2500 Suburban; 1974 International 100; 1968 International 1000C; 1969–1970 International 1000D; 1971–1973 International 1010; 1972–1973 International 1010 Travelall; 1968 International 1100C; 1969–1970 International 1100D; 1971–1973 International 1110; 1975 International 150; 1968–1969 International 908C; 1975 International Travelall 150; 1974–1988 Jeep J10; 1977–1987 Jeep J20.
Warn lists specific years for each model, such as the Ford F-150 for 1976-1996 and the Jeep J10 for 1974-1988. Years outside those ranges, and full-time 4WD systems without a conversion, are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Warn says vehicles with full time 4WD need a transfer case conversion, and vehicles with 3 bolt automatic hub covers need spindle nut kit WAR 32720.
Locking hubs sit at the wheel end, so plan for wheel bearing checks after installation. Switching a full-time 4WD vehicle to manual hubs needs the transfer case conversion first, which is a bigger job than the hubs themselves.
What’s included
- Standard manual locking hub kit, part number 9790
Not included: Transfer case conversion for full-time 4WD, and spindle nut kit WAR 32720 for 3 bolt automatic hub covers.














