Overview
The Warn Premium Manual Locking Hubs 9062 are chrome manual locking hubs for 27 spline outer axles with 6 bolt flange style mounting. Warn labels the fitment direct fit, and no specific vehicles are named.
The Premium Hub is an all-metal design for off-road use, with a ZA Alloy dial. Positive engagement takes a full 9/10ths of a turn of the dial. A thick wave spring inside the hub and heavy detents hold the dial in place.
All Warn hubs carry a limited lifetime warranty. The 9062 suits an axle with 27 spline outer shafts and a 6 bolt flange, a combination that Warn describes in the mounting and spline details.
Vehicles with full time 4WD need a transfer case conversion before these hubs can be used.
Key features
- Manual locking hubs for 27 spline outer axles
- 6 bolt flange style mounting
- All-metal construction
- ZA Alloy dial
- Dial turns a full 9/10ths of a turn
- Thick internal wave spring and heavy dial detents
- Chrome finish
- Limited lifetime warranty from Warn
Using manual hubs day to day
Manual locking hubs connect the front axle shafts to the wheels only when engaged, which can reduce drag and wear on the front driveline during normal road driving. The trade-off is that the hubs must be set by hand. Getting into the habit of engaging them before a trail section and disengaging them afterward keeps the system predictable.
Engagement is smoothest when the vehicle is rolled slightly so the dog teeth line up. If the dial will not turn fully, roll the vehicle a short distance and try again rather than forcing it. Hubs that are left engaged for long highway runs can wear faster, so disengage them once the trail work is over.
Seal condition matters too. Water or mud inside the hub can speed corrosion of the wave spring and dial components, so inspect the seal and clean the hub after deep water crossings.
- Engage with the vehicle rolled slightly
- Disengage after the trail section
- Inspect the seal after water crossings
Specifications
| Brand | Warn |
|---|---|
| Part number | 9062 |
| UPC | 12748090625 |
| Part type | Premium manual locking hubs |
| Spline count | 27 splines (outer axles) |
| Mounting | 6 bolt flange style |
| Construction | All metal |
| Dial | ZA Alloy |
| Knob material | Metal |
| Finish | Chrome |
| Warranty | Limited lifetime warranty (Warn) |
Vehicle fitment
The 9062 hubs are direct fit for 27 spline outer axles with 6 bolt flange style mounting. They are not matched to a specific vehicle or model year.
Check your axle’s spline count and the 6 bolt flange before ordering. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Vehicles with full time 4WD will need a transfer case conversion before manual locking hubs can be used. Once fitted, the hubs are locked and unlocked by hand with the dial.









