Overview
The Warn 11714 is a manual hub service kit for front Dana 60 axles with 30 or 35 spline outer shafts. It is named for WARN hub part numbers 11690 and 38826 and supplies the small parts for rebuilding one locking hub.
The kit is for front axles only. It contains the snap rings, gaskets, retaining bolts and O rings needed for those hub styles.
Key features
- Snap rings, gaskets, retaining bolts and O rings
- Fits Dana 60 axles with 30 or 35 spline outer shafts
- Front axle only
- Named for hub part numbers 11690 and 38826
Spline count and axle types
Dana 60 front axles come with more than one outer shaft spline count, and the count decides which hub fits. Counting the teeth on the shaft is the surest way to confirm it before buying parts. Mixing a hub from one count with a shaft of the other will not engage, so the check belongs before the rebuild starts.
On the front axle, the hub is exposed to mud and water, so seal condition matters more than on many other parts. When a locking hub is rebuilt, the snap ring and gasket behind it are commonly replaced together. A worn hub may also need its axle seal checked while the hub is apart, which is a good time to clean the area.
- Count the outer shaft splines before ordering
- Replace gaskets and snap rings in the same job
- Inspect the axle seal while the hub is off
Specifications
| Brand | Warn |
|---|---|
| Part number | 11714 |
| UPC | 12748117148 |
| Kit type | Standard/premium manual hub service kit |
| Axle | Dana 60 with 30 or 35 spline outer shafts |
| Position | Front |
| Named hub part numbers | 11690, 38826 |
| Contents | Snap rings, gaskets, retaining bolts, O rings |
Vehicle fitment
The kit is for front Dana 60 axles and WARN hub part numbers 11690 and 38826. Check your axle and hub part number against those before ordering.
Dana 60 is an axle name, not a vehicle list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the outer shaft spline count, 30 or 35, before rebuilding, since the kit is named for both sizes. Use it on the front axle only.
What’s included
Snap rings, gaskets, retaining bolts and O rings for one hub rebuild.
Not included: the hub assembly.









