Overview
The Warn Fuel Tank Skid Plate, part number 67820, provides 3/16-inch steel protection between the gas tank and the trail for Jeep Wranglers. It bolts directly to the frame at the factory attachment points, adding protection over the stock setup.
A TJ version has a dropped center relief that provides fuel pump clearance and protection on that model. Both versions have drain holes that keep the plate clear of debris. The black powder coat resists rust.
Key features
- 3/16-inch steel fuel tank protection
- Bolts to the frame at the existing factory attachment points
- Dropped center relief on the TJ for fuel pump clearance
- Drain holes keep debris off the plate
- Black powder coat finish
Skid plates and trail impacts
A fuel tank skid is positioned to take hits from rocks, stumps and ledges that would otherwise reach the tank. Its job is to deflect and spread impact loads across the frame attachment points. Steel thickness and mounting strength both matter, because a plate that flexes or loosens may not protect as expected.
Debris collects under the vehicle during rock crawling and in deep mud, so drainage matters as much as strength. Inspect the plate after rough trips for dents, cracked welds on the frame brackets, and worn powder coat that may expose metal to moisture. Keep an eye on the fuel lines and filler hose as well, since a shifted skid can press on them.
- Check bolt tightness after the first hard trail day
- Touch up bare spots in the powder coat promptly
- Look for contact marks on the tank and lines
Specifications
| Brand | Warn |
|---|---|
| Part number | 67820 |
| UPC | 12748678205 |
| Position | Fuel tank |
| Material | 3/16-inch steel |
| Finish | Black powder coat |
| Drainage | Drain holes |
| Mounting | Existing factory attachment points |
| Installation | No cutting or drilling required |
Vehicle fitment
Fitment is for Jeep Wranglers, and the TJ version has a dropped center relief. Check the relief against your Wrangler’s fuel pump location before ordering.
Check the plate’s center relief against your Wrangler’s fuel pump location before ordering, since the TJ version differs. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The plate bolts to the existing factory attachment points and requires no cutting or drilling. The TJ version’s dropped center allows room for the fuel pump.
What’s included
The fuel tank skid plate with factory-point mounting.
