Overview
The DV8 Offroad SPJL-05D is a black powder coated steel DEF and exhaust skid plate for the 2020–2026 Jeep Wrangler (JL) diesel.
The skid plate encases the diesel exhaust fluid tank and muffler so they can take hits on the trail. It suits diesel JL owners who want the DEF tank protected without giving up clearance.
The diesel Wrangler JL carries a DEF tank near the rear, with the muffler nearby. This skid plate wraps both, and a heat barrier keeps exhaust heat away from the plastic tank. It is 3/16-inch steel with a black powder coat and mounts with stainless steel hardware, which resists corrosion better than plain bolts. Gasoline JL owners should first confirm whether their Wrangler has a DEF tank.
Key features
- Encases the DEF tank and muffler
- Heat barrier between the exhaust and the plastic DEF tank
- 3/16-inch steel construction
- Black powder coat finish
- Fully bolt-on using stainless steel hardware
- No cutting or drilling required
- Designed to give protection without compromising clearance
Diesel exhaust and skid plates
On a diesel vehicle, the exhaust and the fluid tank share a tight space near the rear, and rock strikes often land on the lowest point of that area. A skid plate spreads the impact across a flat surface instead of letting a single rock dent or puncture a component. Heat management matters just as much, because exhaust heat can soften plastic over time if nothing separates the two.
Before fitting any skid plate under a diesel, check the rest of the underbody for loose clamps, worn brackets and exhaust hangers. A plate that is bolted tight can still rub if a hanger has sagged. After rough trail use, look at the heat barrier and the plate edges for scuffs, and re-check the hardware once the plate has settled.
- Inspect exhaust hangers before and after installation
- Look for heat marks on the barrier after long runs
- Re-check stainless fasteners after the first trail outings
Specifications
| Brand | DV8 Offroad |
|---|---|
| Part number | SPJL-05D |
| Product type | Exhaust skid (DEF tank and muffler skid plate) |
| Material | 3/16-inch steel |
| Finish | Black powder coat |
| Hardware | Stainless steel |
| Heat protection | Heat barrier between exhaust and DEF tank |
| Installation | No cutting or drilling required |
| Fitment type | Direct fit |
Vehicle fitment
It fits 2020–2026 Jeep Wrangler (JL) models, designed for the diesel version with a DEF tank.
Earlier Wranglers and the Gladiator are not covered. Confirm that your Wrangler has a DEF tank, along with its year, model and trim, before ordering.
Installation notes
The skid plate bolts on fully with stainless steel hardware, which keeps installation simple. Keep the heat barrier between the plastic DEF tank and the exhaust at all times.
What’s included
Skid plate with stainless steel hardware and heat barrier.















